Access to Jio Centrum Gateway settings

[Sammy]

Anybody has any idea what the default ID and Password are? I tried googling and the 'admin' + 'jiocentrum' credentials aren't working.

 

[crymetyme]

has the light settings on the router(jco110) changed in the new firmware to blinking green while Being connected and stable green light when not connected,mine is stable as i am not getting the new firmware but my few friends have got the update and there routers light is always blinking green while mine is stable green

 

[Tekky]

So for anyone else facing the same issue. Yes, just need to press and hold the reset button, and then power cycle it.

All wireless and other config done on the Jio device gets reset along with the password. However it would auto connect to the Jio network without issues. Once reset you'd need to connect over ethernet or the default wireless network (password is at the bottom of the device)

That means we don't even need to set ipv4/v6 ip,dns,gateway etc. in the windows adapter settings and just leave it as is to AUTO mode and the internet would work ?
But upon being reset, We would need to remove/modify the default wifi ssid/pass of the router... @Sammy If we forget 192.168.29.1 credentials, then just reset and that is all !! nothing much else to configure except ^^

 

[VinayakaSP]

This worked! Thanks a lot. Was able to get in and switch on uPNP to get an Open NAT Type for Warzone

View attachment 1594

Will the factory resetting the Jio Fiber router cause any disruption in Internet service? Do we need to configure anything later?

 

[Xecuter]

no it will not, that's the first thing I did coz I was bothered seeing that installation guy phone name in router.

 

[shashank]

This worked! Thanks a lot. Was able to get in and switch on uPNP to get an Open NAT Type for Warzone

View attachment 1594

how do i factory reset the ont please guide because the hyperlink you provided is not working