Adsl-adsl_ansi_t1.413

[ssiva20]

hi,any body tell me about adsl_gmdt /Adsl-ANSI which one is best, i am using beetel modem for BSNL combo home 500 c, up to last wek my modem connect thro adsl GMDT, but from yesterday connect only thro ADSL ANSI,,pl clarify me:hysterical:

 

[essbebe]

For a stable connection GDMT or Adsl2
preferred.
if there is no problem
IF IT WORKS DO NOT REPAIR

Is it beetel 220BXI ?
Uncheck Adsl2+ in DSL page.

 

[ssiva20]

hi,beetel 440 txi adsl wifi modem

 

[essbebe]

How to change your password for broadband access
confirm the modem pages look like this.
( No wireless in above )

 

[ssiva20]

ya as per above modem pagas ,,,, and modeam status like below and wireless also thereModem Status Connection Status Connected Trained Modulation ADSL_G.dmt LOS Errors 0 Peak Cell Rate 1207 cells per sec Path Mode Fast Path Selected Modulation 0x0082 SEF Errors 0 ATUC Vendor Code 4753504E (Globespan) ATUC Vendor Code String GSPN ATUC Revision 1 Trellis 1 BitSwap 1 Showtime Count 1 Showtime times 1 DSL Uptime (s) 1:35:14 Last DSL Uptime (s) 0:00:00 Up Down -------------------------------------------------------------------------------- Rate (Kbps) 512 2048 Margin (db) 20.0 31.0 Line Attenuation (db) 8.0 26.5 Transmit Power (dbm) 12.5 18.8 Payload (Kbps) 744480 3860880 Max Attainable Bit Rate (bps) -1 12224 k Superframe Count 336564 336566 CRC Fast 1 0 Interleaved 0 0 DSL Statistics Near End F4 Loop Back Count 0 Near End F5 Loop Back Count 0

 

[ssiva20]

How to change your password for broadband access
confirm the modem pages look like this.
( No wireless in above )

as per ur details modem pages there, to day mor 5.30am modem status





Modem Status
Modem Status
Connection Status Connected

Trained Modulation ADSL_ANSI_T1.413
LOS Errors 0
Peak Cell Rate 1207 cells per sec
Path Mode Fast Path

Selected Modulation 0x00FF
SEF Errors 0
ATUC Vendor Code FFFFFFFF
ATUC Vendor Code String ____
ATUC Revision 0
Trellis 1
BitSwap 1
Showtime Count 1

Showtime times 1
DSL Uptime (s) 0:01:06
Last DSL Uptime (s) 0:00:00



Up Down

--------------------------------------------------------------------------------

Rate (Kbps) 512 2048
Margin (db) 0.0 31.0
Line Attenuation (db) 0.0 29.5
Transmit Power (dbm) -51 3.9
Payload (Kbps) 13344 24048
Max Attainable Bit Rate (bps) 0 0 k
Superframe Count 4024 4025
CRC
Fast 1 0
Interleaved 0 0



DSL Statistics
Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

what can i do:hysterical:

 

---

[essbebe]

What you want to do now ?
Save the screnshot of the modem settings page , as a jpg picture.
Upload it at TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

Give the link here.
Example page :http://i47.tinypic.com/2exam3l.jpg
You can change to CHAP aand check MRU and other values.
If you are on "Dialer" mode page may not appear.
Trained Modulation ADSL_ANSI_T1.413 (* OK)
Rate (Kbps) 512 2048...........................(*OK)
Margin (db) 0.0 31.0............................(*upload data seems to be error?)
Line Attenuation (db) 0.0 29.5.............. ( * seems in error upload data ?)
Transmit Power (dbm) -51 3.9...............(*-51 ??)
Payload (Kbps) 13344 24048..................(* unstable sync ?)

 

[ssiva20]

pl see my yesterday post is it ok, then tell me

 

[essbebe]

[COLOR="Red"]IF IT WORKS DON'T REPAIR

[/COLOR]
2.
save present settings ( backup) of modem
( see under maintenence/tools )
to say C:/My Documents/internet working

 

[ssiva20]

hi,still problem today connected adsl ansi ti 413 and same up stream data is zero ,i just give complaint to bsnl