BB not working

[Sahyadri]

Modem: D-Link GLB-502T
Connection Mode: PPPoE
No parallel Line, Line not noisy, Splitter connected.
ADSL LED Glowing.

Modem Log:
auto_vcc_default oamPing(0.96)result(2)
auto_vcc_search oamPing(0.35)result(2)
auto_vcc_search oamPing(8.35)result(2)
auto_vcc_search oamPing(0.43)result(2)
auto_vcc_search oamPing(0.51)result(2)
auto_vcc_search oamPing(0.59)result(2)
auto_vcc_search oamPing(8.43)result(2)
auto_vcc_search oamPing(8.51)result(2)
auto_vcc_search oamPing(8.59)result(2)
Conn Delay Timer started for 50 sec
pppd 2.4.1 started by root, uid 0
TimerEvent: PPPoE not in a state to handle it; currState 3.
DSL Carrier is down
del_iptable_rules : ppp_name not intact
PPPD was Properly Stopped. Current State=2
PPPD Restart Filter = 0
DSL Carrier is up
auto_vcc_default oamPing(0.35)result(2)
auto_vcc_default oamPing(0.32)result(2)
auto_vcc_default oamPing(0.40)result(2)
auto_vcc_default oamPing(0.36)result(2)
auto_vcc_default oamPing(0.38)result(2)
auto_vcc_default oamPing(0.96)result(2)
auto_vcc_search oamPing(0.35)result(2)
auto_vcc_search oamPing(8.35)result(2)
auto_vcc_search oamPing(0.43)result(2)
auto_vcc_search oamPing(0.51)result(2)
auto_vcc_search oamPing(0.59)result(2)
auto_vcc_search oamPing(8.43)result(2)
auto_vcc_search oamPing(8.51)result(2)
auto_vcc_search oamPing(8.59)result(2)
pppd 2.4.1 started by root, uid 0


Modem Status :
Connection Status Connected
Us Rate (Kbps) 509
Ds Rate (Kbps) 2042
US Margin 28
DS Margin 31
Trained Modulation ADSL_2plus
LOS Errors 0
DS Line Attenuation 27
US Line Attenuation 13
Peak Cell Rate 1200 cells per sec
CRC Rx Fast 0
CRC Tx Fast 0
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Interleaved

DSL Statistics
Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

 

[essbebe]

Diagnostics page screen shot please.
DSL Carrier is up
If working OK earlier may be temporary ISP failure.


REFERENCE:http://www.dlink.co.in/GLB502T_Guide_modified/index.htm#PhysicalConnections
2.http://www.dlink.co.in/GLB502T_Guide_modified/index.htm#Troubleshooting

 

[Sahyadri]

I have 2 lines, both showing the same problem. I tried with 3 different modems. In bridge mode Dial-up it gives error 651. :wall:

 

[essbebe]

@Sahyadri
In bridge mode Dial-up it gives error 651. :wall:
Delete present dialup and TCP/IP settings.

Program a new dialer. and TCP/IP settings.

REF : Google search: " error 651" summarised.


Or Try with "Always On" connection instead of dialer mode.

 

[Sahyadri]

@essbebeThe problem resolved automatically today morning. :dance:I guess it was a ISP problem as you said earlier.I searched error 651 on this forum as well as google before posting here and tried the suggestion found on some sites, but this too didn't help.:wall:

 

[Sahyadri]

The problem reappeared today around 4:00 PM until 10:00 PM

 

---

[superprash2003]

is the ADSL link stable always for you?

 

[icycool25]

Man...I dont whats wrong with BSNL...This connection failure is happening every 2-3 days now..! Its horrible. Just today, after 12 days of application my plan was shifted from "Home 500" to "UL Home 500" (UL 750 reduced to UL 500). And just look at the speed. Its disgusting. I wanted to post a snap-shot of my plan change from the DataOne portal and it took me around half an hour to upload a 1 MB pic file..!!

 

[Sahyadri]

@superprash2003ADSL is always stable.@icycool25You can reduce the image file size using image editing softwares.Print screen images can be reduced to 150 kb (jpg) retaining good quality.

 

[icycool25]

Thanks a lot four your inputs, Sahyadri..! The actual image size was around 2 Mb. After cutting out the required portion, the final file size was an Mb. And I was horrified with the time taken to upload it. This irritates me, expecially because, when I had my previous Home 500 plan with 2 Mbps, I used to upload files as large as 8 Mb in just minutes...!