Hello everyone,I just got a Dataone 999 unlimited connection and already have an Beetel 220BX modem from my Airtel connection. Can someone please tell me the settings I need to change in order to get it to work with BSNL. Also can i configure automatic login instead of the BSNL dialer.Thnx
-
Amazon Deals - ToS - Like us?
Beetel 220bx modem settings
- Thread starter stalion
- Start date
- Replies 9
- Views 21,178
Welcome to broadbandforum.co
see these screen shots.
http://i23.tinypic.com/nlpdhs.jpg
http://i21.tinypic.com/33osc9d.jpg
Select VPI/VCI 0_35 select PPP/PPPoE
in WAN page enter BSNL user ID without @ bsnl.in
enter password.
For more screenshots tinypic.com in search type beetel
rest as usual.
Save reboot wait for two minutes.
see these screen shots.
http://i23.tinypic.com/nlpdhs.jpg
http://i21.tinypic.com/33osc9d.jpg
Select VPI/VCI 0_35 select PPP/PPPoE
in WAN page enter BSNL user ID without @ bsnl.in
enter password.
For more screenshots tinypic.com in search type beetel
rest as usual.
Save reboot wait for two minutes.
@stalion: NO NEED for screen shots.Installation Process of Beetel 220BX Combo modem. Modem settings for NIC/LAN card
efault Ip address 192.168.1.1Subnet Mask 255.255.255.0IP address 192.168.1.x ( x= 2 to 50 (say))DNS server use open DNS 208.67.220.220 208.67.222.222Log in the router page in IE:Select WAN 1.In WAN set up choose all the WAN interfaces by checking on remove and then click on remove.2.Click on ADD Change the VPI to 0 and VCI to 35 (* most important setting ) then click on next3. Select PPP over Ethernet PPPoE4. Select llc/snap-bridging click NEXT5. In PPP username and password( *without @ bsnl.in)6. Enter PPPoE service as BSNL7. Use Autnentication mode as AUTO8. Leave other two boxes unchecked. click NEXT9. Click NEXT again 10 Clickon SAVE on the NEXT screen 11. Clickon SAve Reboot and WAIT for approx 5 mnts.12. Configuration is successful Happy surfing
efault Ip address 192.168.1.1Subnet Mask 255.255.255.0IP address 192.168.1.x ( x= 2 to 50 (say))DNS server use open DNS 208.67.220.220 208.67.222.222Log in the router page in IE:Select WAN 1.In WAN set up choose all the WAN interfaces by checking on remove and then click on remove.2.Click on ADD Change the VPI to 0 and VCI to 35 (* most important setting ) then click on next3. Select PPP over Ethernet PPPoE4. Select llc/snap-bridging click NEXT5. In PPP username and password( *without @ bsnl.in)6. Enter PPPoE service as BSNL7. Use Autnentication mode as AUTO8. Leave other two boxes unchecked. click NEXT9. Click NEXT again 10 Clickon SAVE on the NEXT screen 11. Clickon SAve Reboot and WAIT for approx 5 mnts.12. Configuration is successful Happy surfingharsh_cooldude
Newbie
saurav_wow
Newbie
i am also using 220bx modem.....
previously i used a UT200RTU modem provided by bsnl on rent..
then i got this 220 bx modem from my friend who used to have airtel connection..
what i did is took a backup of the config settings on the bsnl's UT200RTU modem to my HDD and uploaded it to the Airtel 220bx modem...
now i can use dataone in 220bx modem...
u could do the same...
problem is that where will you find the config settings...
well u can ask fellow members who use 220bx modem to give you a backup copy of the config settings..except that they should remove the password before backup..
or u can mail me @ [email protected]... i can give you the backup settings on my 220bx modem...
previously i used a UT200RTU modem provided by bsnl on rent..
then i got this 220 bx modem from my friend who used to have airtel connection..
what i did is took a backup of the config settings on the bsnl's UT200RTU modem to my HDD and uploaded it to the Airtel 220bx modem...
now i can use dataone in 220bx modem...
u could do the same...
problem is that where will you find the config settings...
well u can ask fellow members who use 220bx modem to give you a backup copy of the config settings..except that they should remove the password before backup..
or u can mail me @ [email protected]... i can give you the backup settings on my 220bx modem...
@members/harsh_cooldude/
see this thread also. where you have posted the same problem.
https://broadband.forum/bsnl-broadband/24925-insatalling-beetel-220bx-adsl-modem-windows-98-a/
see this thread also. where you have posted the same problem.
https://broadband.forum/bsnl-broadband/24925-insatalling-beetel-220bx-adsl-modem-windows-98-a/
@stalion: NO NEED for screen shots.
Installation Process of Beetel 220BX Combo modem.
Modem settings for NIC/LAN card:
Default Ip address 192.168.1.1
Subnet Mask 255.255.255.0
IP address 192.168.1.x ( x= 2 to 50 (say))
DNS server
use open DNS 208.67.220.220 208.67.222.222
Log in the router page in IE:
Select WAN
1.In WAN set up choose all the WAN interfaces by checking on remove and then click on remove.
2.Click on ADD Change the VPI to 0 and VCI to 35
(* most important setting ) then click on next
3. Select PPP over Ethernet PPPoE
4. Select llc/snap-bridging click NEXT
5. In PPP username and password
( *without @ bsnl.in)
6. Enter PPPoE service as BSNL
7. Use Autnentication mode as AUTO
8. Leave other two boxes unchecked. click NEXT
9. Click NEXT again
10 Clickon SAVE on the NEXT screen
11. Clickon SAve Reboot and WAIT for approx 5 mnts.
12. Configuration is successful Happy surfing
Thanks:thumbsup: settings working perfectly
Installation Process of Beetel 220BX Combo modem.
Modem settings for NIC/LAN card:
Default Ip address 192.168.1.1
Subnet Mask 255.255.255.0
IP address 192.168.1.x ( x= 2 to 50 (say))
DNS server
use open DNS 208.67.220.220 208.67.222.222
Log in the router page in IE:
Select WAN
1.In WAN set up choose all the WAN interfaces by checking on remove and then click on remove.
2.Click on ADD Change the VPI to 0 and VCI to 35
(* most important setting ) then click on next
3. Select PPP over Ethernet PPPoE
4. Select llc/snap-bridging click NEXT
5. In PPP username and password
( *without @ bsnl.in)
6. Enter PPPoE service as BSNL
7. Use Autnentication mode as AUTO
8. Leave other two boxes unchecked. click NEXT
9. Click NEXT again
10 Clickon SAVE on the NEXT screen
11. Clickon SAve Reboot and WAIT for approx 5 mnts.
12. Configuration is successful Happy surfing
Thanks:thumbsup: settings working perfectly
manju_61944
Newbie
Hi essbebe,
i tried to configure the Beetel 220BX for dataone following all the instructions provided im getting few error's could not identify what exactly is happening coz i'm able to see the IP address in Device info under WAN but when i check the Diagnostics it show FAIL in few lists as :
-----------------------------------------
http://img407.imageshack.us/img407/9449/diagsjq0.jpg
------------------------------------------
http://img407.imageshack.us/img407/1409/wanmp0.jpg
----------------------------------------------
waiting for ur reply.....
i tried to configure the Beetel 220BX for dataone following all the instructions provided im getting few error's could not identify what exactly is happening coz i'm able to see the IP address in Device info under WAN but when i check the Diagnostics it show FAIL in few lists as :
-----------------------------------------
http://img407.imageshack.us/img407/9449/diagsjq0.jpg
------------------------------------------
http://img407.imageshack.us/img407/1409/wanmp0.jpg
----------------------------------------------
waiting for ur reply.....
You are checking the wrong link 1_32. CLICK NEXT ! VPI/VCI BSNL 0 and 35 check this.In wan page click connect. second entry.Check again Diagnostics.In Dialer mode In any modem, selecting the VPI/VCI will connect to new ISP.You use the new ISP ID and PW externally. "Always On" mode additionally you enter user ID and password.