clone remote

[tech_help]

When DTH was installed, the executive cloned the tv remote to STB remote.Some keys dont function when I use STB remote with TV.Anyone knows how to clone the STB remote from TV remote?

 

[amish]

General steps (dont know if applicable to Airtel remote though, but this is the logic)First you need working TV remote.Put TV remote IR plate face to face with STB remote IR plateYou have to hold pairing button for abt 3 seconds.Then press button u want to map on TV remote and then press map button on STB remote.Thats all, repeat for any other buttons u may want to map.

 

[tech_help]

which is the pairing button?

 

[amish]

I dont know abt Airtel remote but in my remote the pairing button is named "SET"

 

[croper]

It is there in the website I think.

----------

BTW that airtel STB remote will work for TV for only AV,Volume + - , Mute, TV Power

----------

here it is

Airtel brings you the magical universal remote so that you can enjoy watching TV with just one remote. While our installation team will set up the remote to work with your brand of TV, the following steps gives you an overview of making the remote learn:

There are 5 basic functions which your new Airtel remote needs to learn about your TV
1. TV Power code
2. TV Mute code
3. AV code
4. TV VOL + code
5. TV VOL – code

Step 1: Bring Airtel digital TV remote in learning mode. Press and hold ‘’OK + Numeric 2” key for 3 seconds. The LED blinks twice to indicate that your Airtel remote is ready to learn.

Step 2 : Hold the source remote and Airtel remote in front of each other ( 3cm-6m apart).

Step 3: Press & release the key (First on Airtel remote and then on Source remote) which needs to be programmed in Airtel remote.
Example: Press and release the TV Power key on both remotes and release. The Airtel remote blinks twice to indicate a successful learning of ‘TV power code’.

Step 4: Now Press & release other keys ( on both remotes simultaneously) : Mute , AV, Vol +/-.

Step 5: Press "OK" on Airtel remote to store the new information about your TV. The LED will blink twice to indicate successful transfer to knowledge from your current TV remote to the new Airtel remote.

If the Airtel remote blinks four times, it means the learning failed. Go to Step 1 again

 

[amish]

yes my cable remote also has just 5 to 6 programmable buttons.btw its not compulsory to have vol+/- or power button only. you can set any 5-6 buttons of ur tv remote. only thing u shall have to remember what is what.