-
Amazon Deals - ToS - Like us?
Complete Realignment Procedure Details of Sun Direct
- Thread starter Smile
- Start date
- Replies 35
- Views 97,113
how to update ST.BOX?
hello dear hope you are fine dear i receive your msg ok becare fully . if your receiver is not upgrated you are unabale2 change your home TP so pls fist you update your ST.BOX on your old satellite and upgrate it VIA satellite its take 30 mints to 45 mints then your stb menu is changed and then you are abale 2 EDIT new TP if still its showing home TP=11030 . then your stb is not upgrated hope you got it if you have and Q free ask and mail me thx
with best reg RAJA ABBAS DUBAI UAE
leasehelp::icry:
hello dear hope you are fine dear i receive your msg ok becare fully . if your receiver is not upgrated you are unabale2 change your home TP so pls fist you update your ST.BOX on your old satellite and upgrate it VIA satellite its take 30 mints to 45 mints then your stb menu is changed and then you are abale 2 EDIT new TP if still its showing home TP=11030 . then your stb is not upgrated hope you got it if you have and Q free ask and mail me thx
with best reg RAJA ABBAS DUBAI UAE
leasehelp::icry:Hi Naveen..
You need to rotate/realign the dish in the east to south direction by say 2 degrees approx. Also, depending on your present alignment, you may need to turn the dish up by say 2-3 degrees. do not touch the LNB [the device which collects the signal reflected from the dish] unless there is some problem with the original installation.
Hi Smile
Am using Samsung STB. I changed Freq n Symbol rate (12316 v 30000), polarisation not changed. Signal and quality shows 0%.
Do dish to be realigned? then what angle?
---------- Post added at 10:22 AM ---------- Previous post was at 10:17 AM ----------
Hi Naveen..
You need to rotate/realign the dish in the east to south direction by say 2 degrees approx. Also, depending on your present alignment, you may need to turn the dish up by say 2-3 degrees. do not touch the LNB [the device which collects the signal reflected from the dish] unless there is still some problem with the original installation.
Tip: Make small adjustments and wait a few seconds for the signal strength to show up on the tv. The adjustment is so small that you may not notice any change in the position of the dish at all!
You need to rotate/realign the dish in the east to south direction by say 2 degrees approx. Also, depending on your present alignment, you may need to turn the dish up by say 2-3 degrees. do not touch the LNB [the device which collects the signal reflected from the dish] unless there is some problem with the original installation.
Hi Smile
Am using Samsung STB. I changed Freq n Symbol rate (12316 v 30000), polarisation not changed. Signal and quality shows 0%.
Do dish to be realigned? then what angle?
---------- Post added at 10:22 AM ---------- Previous post was at 10:17 AM ----------
Hi Naveen..
You need to rotate/realign the dish in the east to south direction by say 2 degrees approx. Also, depending on your present alignment, you may need to turn the dish up by say 2-3 degrees. do not touch the LNB [the device which collects the signal reflected from the dish] unless there is still some problem with the original installation.
Tip: Make small adjustments and wait a few seconds for the signal strength to show up on the tv. The adjustment is so small that you may not notice any change in the position of the dish at all!
Tip: Make small adjustments and wait a few seconds for the signal strength to show up on the tv. The adjustment is so small that you may not notice any change in the position of the dish at all!
Also first mark the original direction and elevation before turning the dish so that even if unsuccessful you can come back to the old place.
Also first mark the original direction and elevation before turning the dish so that even if unsuccessful you can come back to the old place.
hemanth.aragonda
Newbie
We also need to rotate LNB slightly in order to get all the channels on Sun Direct DTH from new satellite.
I have tried the alignment procedure given in the above replies. But I was not able to receive few channels and the channels details were getting downloaded every time I switch on the STB.
I did a small research on the satellite position and did some more alignment which is not given in any of above replies. Finally I succeeded with signal strenght 79% to 84% and quality 94% to 99%.
The complete procedure is giving at Ambience: Sun Direct - Dish Realignment Procedure.
I have tried the alignment procedure given in the above replies. But I was not able to receive few channels and the channels details were getting downloaded every time I switch on the STB.
I did a small research on the satellite position and did some more alignment which is not given in any of above replies. Finally I succeeded with signal strenght 79% to 84% and quality 94% to 99%.
The complete procedure is giving at Ambience: Sun Direct - Dish Realignment Procedure.