Hello All,
I wanted to share with you the basic BSNL FTTH VOIP configuration for Gujarat region.
I have a Fiber Basic Plan for testing purpose on which I have somehow managed to get VOIP working decently.
Below is what I did (summarized) - ONT - Syrotech (WIFI Model with 2GB LANS + 1 POTS).
*** For Gujarat region
*** You must have a proper working VOIP Profile set in your ONT, i.e., your ONT should show your VOIP number as Registered.
1. Change VOICE Profile in Network to VOICE_INTERNET. Check Turn of LAN DHCP. Bind to any one LAN PORT.
2. 802.1p - NULL.
3. IP Protocol - IP4 Only.
4. DHCP Mode.
5. VLAN - For 299 series 1849.
6. Enable NAT.
7. Request DNS - Enabled.
8. Add Static Route to ONT Destination - 10.0.0.0 Subnet - 255.0.0.0 Gateway - YOUR VOIP Gateway(10.x.x.x) Metric - 0 Interface - VOICE_INTERNET.
9. Enable UPNP for VOICE_INTERNET.
10. Change NAT to 1.
11. Disable SIP in ALG Configuration. (Enable if disabled then disable again, i don't know why this works).
12. Insert LAN Cable in the Port selected in point 1 and connect other end to WAN of any old Wireless / Wired Router.
13. Open Router admin page and set its WAN to Static IP and enter one of the ONT LAN IP (eg. 192.168.1.10, if your ONT is at 192.168.1.1).
14. Enter WAN DNS manually Primary - 172.30.249.33 and Secondary - 172.30.249.11.
15. Set the Router LAN IP to anything other than 192.168.1.x subnet (eg. set it to 192.168.0.1).
16. Enable DHCP in router and change DNS as above in point 5.
17. Save router settings and reboot.
18. Ping your default VOIP gateway(10.x.x.x) from a PC connected to the router network (eg. 192.168.0.2). If ping okay then continue else you messed up something, try again from the beginning.
--MicroSIP specific--
19. Download MicroSIP or Zoiper5 on Windows PC (MicroSIP is available for Linux too)
20. Open MicroSIP - Create new account. Username, Login, Display name is your phone number (eg. +91 + std code without leading zero + your number).
21. Password is ftth@last 4 digits of your number.
22. SIP Server/Proxy/Domain is gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of Huawei, if so, use gj.ftth.utims.bsnl.in).
23. Select Transport UDP.
24. Click Save. If all goes well you'll be registered and see green icon on MicroSIP. It may take many tries (5 to 10 minutes before being successful).
--Zoiper5 specific--
25. Open Zoiper5 free edition.
26. Login - is your phone number (eg. +91 + std code without leading zero + your number).
26. Password is ftth@last 4 digits of your number.
27. SIP Server - gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of huawei, if so, use gj.ftth.utims.bsnl.in).
28. Tick authentication and outbound proxy.
29. Outbound proxy - gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of huawei, if so, use gj.ftth.utims.bsnl.in).
30. Leave authentication username id empty.
31. Zoiper will show which protocol it found and add the account and make it active.
--Default Android Dialer--
32. Go to call settings - calling accounts - add SIP account.
33. SIP Server - gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of huawei, if so, use gj.ftth.utims.bsnl.in).
34.Username - is your phone number (eg. +91 + std code without leading zero + your number).
35. Password is ftth@last 4 digits of your number.
34. Advanced SIP settings - outbound proxy same as SIP Server.
35. SIP Server Port - 5060.
36. Protocol - UDP (TCP connects but I didn't get any sound).
37. Keep Alive - Automatic.
38. Save account. It will display something like checking status and then 10 - 15 seconds later it will be registered.
--Zoiper Android--
39. Refer to Zoiper5 settings as they are same on android too.
I am willing to help at my spare / free time only, through email only no remote configuration.
Hope that you get your VOIP going as well.
Best regards.
Nikki
I wanted to share with you the basic BSNL FTTH VOIP configuration for Gujarat region.
I have a Fiber Basic Plan for testing purpose on which I have somehow managed to get VOIP working decently.
Below is what I did (summarized) - ONT - Syrotech (WIFI Model with 2GB LANS + 1 POTS).
*** For Gujarat region
*** You must have a proper working VOIP Profile set in your ONT, i.e., your ONT should show your VOIP number as Registered.
1. Change VOICE Profile in Network to VOICE_INTERNET. Check Turn of LAN DHCP. Bind to any one LAN PORT.
2. 802.1p - NULL.
3. IP Protocol - IP4 Only.
4. DHCP Mode.
5. VLAN - For 299 series 1849.
6. Enable NAT.
7. Request DNS - Enabled.
8. Add Static Route to ONT Destination - 10.0.0.0 Subnet - 255.0.0.0 Gateway - YOUR VOIP Gateway(10.x.x.x) Metric - 0 Interface - VOICE_INTERNET.
9. Enable UPNP for VOICE_INTERNET.
10. Change NAT to 1.
11. Disable SIP in ALG Configuration. (Enable if disabled then disable again, i don't know why this works).
12. Insert LAN Cable in the Port selected in point 1 and connect other end to WAN of any old Wireless / Wired Router.
13. Open Router admin page and set its WAN to Static IP and enter one of the ONT LAN IP (eg. 192.168.1.10, if your ONT is at 192.168.1.1).
14. Enter WAN DNS manually Primary - 172.30.249.33 and Secondary - 172.30.249.11.
15. Set the Router LAN IP to anything other than 192.168.1.x subnet (eg. set it to 192.168.0.1).
16. Enable DHCP in router and change DNS as above in point 5.
17. Save router settings and reboot.
18. Ping your default VOIP gateway(10.x.x.x) from a PC connected to the router network (eg. 192.168.0.2). If ping okay then continue else you messed up something, try again from the beginning.
--MicroSIP specific--
19. Download MicroSIP or Zoiper5 on Windows PC (MicroSIP is available for Linux too)
20. Open MicroSIP - Create new account. Username, Login, Display name is your phone number (eg. +91 + std code without leading zero + your number).
21. Password is ftth@last 4 digits of your number.
22. SIP Server/Proxy/Domain is gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of Huawei, if so, use gj.ftth.utims.bsnl.in).
23. Select Transport UDP.
24. Click Save. If all goes well you'll be registered and see green icon on MicroSIP. It may take many tries (5 to 10 minutes before being successful).
--Zoiper5 specific--
25. Open Zoiper5 free edition.
26. Login - is your phone number (eg. +91 + std code without leading zero + your number).
26. Password is ftth@last 4 digits of your number.
27. SIP Server - gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of huawei, if so, use gj.ftth.utims.bsnl.in).
28. Tick authentication and outbound proxy.
29. Outbound proxy - gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of huawei, if so, use gj.ftth.utims.bsnl.in).
30. Leave authentication username id empty.
31. Zoiper will show which protocol it found and add the account and make it active.
--Default Android Dialer--
32. Go to call settings - calling accounts - add SIP account.
33. SIP Server - gj.ftth.ims.bsnl.in (your circle might have utstarcom core instead of huawei, if so, use gj.ftth.utims.bsnl.in).
34.Username - is your phone number (eg. +91 + std code without leading zero + your number).
35. Password is ftth@last 4 digits of your number.
34. Advanced SIP settings - outbound proxy same as SIP Server.
35. SIP Server Port - 5060.
36. Protocol - UDP (TCP connects but I didn't get any sound).
37. Keep Alive - Automatic.
38. Save account. It will display something like checking status and then 10 - 15 seconds later it will be registered.
--Zoiper Android--
39. Refer to Zoiper5 settings as they are same on android too.
I am willing to help at my spare / free time only, through email only no remote configuration.
Hope that you get your VOIP going as well.
Best regards.
Nikki
