Configuring Trendnet Router with BSNL modem

[ruchirsaurabh]

Hi All,I am having problem in configuring my Trendnet TEW-432BRP C1.0R router with BSNL's UT300R2U modem. I even took help of Trendnet helpdesk and configured the router as instructed by them. But the router does not connect to the internet. However, I am able to connect directly.I even tried changing the IP address of the router. But the problem remains.Please help me in configuring. I have gone through the earlier posts but none of them were helpful.

 

[essbebe]

Welcome to broadbandforum.co
add to bookmarks also.
see
TRENDnet | Support| KnowledgeBase | TEW-432BRP | How do I connect the TEW-432BRP if my service provider is Bell Sympatico?

IN Ut300r2U enable DHCP.
see
Ut 300r2u - India Broadband Wiki

If still problem post data

START RUN type cmd type ipconfig /all ( *note space after ipconfig)

 

[ruchirsaurabh]

Hi,When I configure the modem in bridge mode, DHCP gets off and am not able to find the option of enable the same. The problem still remains. Below is the details of ipconfig when pc is connected directly to BSNL modem. C:\Documents and Settings\Ruchir>ipconfig /allWindows IP Configuration Host Name . . . . . . . . . . . . : ruchir-pc Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Physical Address. . . . . . . . . : 00-0E-35-BF-98-5EEthernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139 C+ Fast Ethernet NIC Physical Address. . . . . . . . . : 00-0F-B0-45-31-44 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 192.168.1.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1PPP adapter BSNL: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 117.195.42.134 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 117.195.42.134 DNS Servers . . . . . . . . . . . : 218.248.255.212 218.248.255.139 NetBIOS over Tcpip. . . . . . . . : DisabledC:\Documents and Settings\Ruchir>

 

[essbebe]

Try "Always ON" PPP/PPPoE

 

[ruchirsaurabh]

tried. but that does not work

 

[cyberwiz]

DHCP should be off if u r enabling bridge mode...so there is no problem with that.

change the default IP address of router to 192.168.1.2

and change the IP address of the Lan card in the computer to 192.168.1.3 and keep the def. gateway at 192.168.1.2 keep subnet mask in all cases as 255.255.255.0 and DNS 4.2.2.1 secondary dns 208.67.222.22

now enable enable PPPoE mode in the router.

Are u getting the link light as mentioned here http://tiny.cc/blihg ?

 

[ruchirsaurabh]

Hi, I have tried all these. It is still not working. I get all the link lights as mentioned in the URL.

 

[essbebe]

check the Main>Device Information section and check for an IP Address in the WAN section.Post screen shot. If it still does not have an IP address please verify your Username (Usually without @bsnl.in)and Password