Originally posted by agnivo007@May 21 2005, 07:50 PM
U don't need any special software/etc to setup the 502T
ADSL Router!
Just do the following and u r connected to broadband right away!
1. Connect the required cables, splitter, etc. in correct fashion.
2. Open IE/Firefox. Goto 192.168.1.1 and login as "admin",pass="admin".
3. To erase previous settings (to start from fresh),
Click tab "Tools"->"system"->"restore to factory dafault"->wait.
Dont close window till reboot is over. After reboot,
4. Click Tab "Home"->"Run Wizard"->"Next"->enter "admin" pass>select timezone>select "PPPoe/PPPoA">enter bsnl userid, pass>vpi=0>vci=35>PPPoE LLC->Restart.
Dont close window till reboot is over.
5. Goto ur network card's properties from device manager-> choose TCP/IP->Properties->set obtain IP address and
DNS automatically.
6. Reboot your PC and turn off and then back on ur modem.
You can browse at ease now ! This is required one-time and the connection is always on. Don't forget to give a "Thank You"!! :lol:
[snapback]9767[/snapback]