Hathway Cable Modem Quality Signal Levels

[hathway]

Good Quality Signal settings for cable modem

DownStream / Recieve Power Level - -8 to +14 dBmV
DownStream Signal Noise Ratio (SNR) - 32-40 dB (must not below 30dB will cause slow speeds)

UpStream Signal Noise Ratio (SNR) - 31-36 dB (must not below 29dB will cause critical slows slow speeds, No Connectivity, Late signal Detection, often modem drop out)
UpStream / Transmit Power Level - 45 dBmV & lower

Type in IE or Mozilla to see Modem Diagnostics if integrated
http://192.168.100.1/

----------

Cable Modem Diagnostic

Cable Modem Diagnostic is simple program for remote measuring of basis parameters of cable modems. Support DOCSIS standard.



Download
http://www.patilan.com/cmd.exe

just in case if appears to not working open browser hit 192.168.100.1 2-3 times run program again

----------

If Your Signal Levels Fine
Still Getting
Slow Speed, Delay in Modem Coming online
Weird Signal Problem like Cable & send light flashing but no receive
even tough signal levels fine
It is Upstream / Downstream Frequency Channels Problem
Imagine you are watching picture on your set top box & that channel is lagging too much
If that Happens with Internet Channels what will happen?
Right
On browsing you will have to refresh often
On downloading your download will start lag start lag with download acceleration
without download acceleration download will start lag start stoped responding in middle

 

[hathway]

just like when you search for tv frequency channels on your analog cable tvcable modem search for upstream / downstream frequency channels to come online these reverse signal & frequency channels must be receive clear to cable modemreverse signal strength is shown in image "S/N: 32.7 dB"

 

[majorgeek]

i had been searching for this since long...thank you...

 

[pinak19]

u dont need to download any thing just open Command promote and type ping -t 198.xx.xx.xx (your default getway)