Help to Configure Sterlite SAM300AX + Linksys WRT 110 WiFi router

  • Thread starter Thread starter abhijitkn
  • Start date Start date
  • Replies Replies 13
  • Views Views 22,035
I presume that after connecting the Sterlite SAM300AX directly to your computer your internet works. Check out Socrates?s experience: How to configure Linksys WRT54G wireless router. I know its for a different router but the method will be the same even though the screen layout is different. Hope it helps.

BTW the link you provided does not work. :D
 
Select "QUOTE" here and fill up required info.
You can give additional comments in the end .

1.Set up SamAX300 in "Always On" mode. ____________________
2.Enable DHCP in modem ________________________ (done)
3. test computer is connected to Internet._________ ( Yes No )
4. Now transfer rj45 to VOnage unit. _________________________(done)

5. with another rj45 connect to computer from Vonage. ________( done )
6 see the error messages in LCD screen _______________ ( error 004 etc )
Vonage Ip is 192.168.15.1 confirm _____________ (yes/NO)

7. If all Ok , You can dial a number and receive call_________(YES/NO)
( Presume you have U.S vonage number ) _____________ (yes/No)
8. Now transfer the RJ45 from computer to Router WAN/Internet port _____
(ip address will be 192.168.2.1)
9. Settings for Wifi router as above post _____________( success ?)

10. Check computer gets connected to Inter net ____________ ( success ?)

11. Now try WIFI mode _______________ ( ( set up complete? )

12. Ensure in computer/laptop TCP/Ip obtain Ip address is selected. ___( done ?)

13. Check 192.168.1.1 ,192.168.15.1, ( no changes required) and 192.168.2.1 ,
are accessible in your browser ___________________________( Yes /NO )

14. further feedback __________________________


______________

REFERENCE: Interactive guide for wrt54G.
( screen shots )
confirm similar model.
http://ui.linksys.com/files/WRT54G/setup_wiz_2.1/001.jpg
 
Hi Socrates,

I was on bridge connection. The problem I'm facing is that the connection drops frequently & reconnection happens only after 1 or 2 hrs.
Below were the setups on Sterlite & Linksys routers.
http://www.fileden.com/files/2007/10/20/1524799/SAM300_LinksysWRT110.pdf

Also, I replaced the Sterlite modem with the new one from MTNL & trying to connect using only Sterlite router, but I'm unable to do so. the pwd & username are correct. Below are the current settings on Sterlite
http://www.fileden.com/files/2007/10/20/1524799/SAM300.pdf

Please help..it's becoming frustrating
 
My Post . Stuck in step 1 >(a) Use "Always On mode " Now(b)uncheck mod mode adsl2 + (c) snr attn line mod selected of sam 300ax required. upload Page as Jpg picture . and give link here . (d)Change time zone to gmt +0530 in Linksys enable "Bridged" in modem.(e) post ipconfig /all data for modem router (NO vonage)
 
Your replacement modem is on PPPoE as seen in your pix.
Does this replacement modem connect to the internet? (Disconnections we will come to later)
Does your Sterlite modem connect to the internet in the PPPoE mode?
I suggest you get the modem working in PPPoE mode & then get the WiFi working (for WiFi check the I gave in the last post), after that connect vonage phone.

For the disconnections there can be many reasons at your end
Check that the tel Wire coming into your house comes first to the splitter of your modem & after that the regular phone should be connected.
Also check wire joints if any for loose connections or oxidation. If this is already done then complain to MTNL about frequent disconnections. As there are many people who are facing this problem & you maybe one more to the list. :icry:

Also post reading of SNR Margins & Line Attenuation.
 

Hi Socrates,

As you said I'm trying to connect to the internet using only Sterlite modem. The settings as I have posted in the link above. Still I'm unable to get the adsl signal.

How shall I check SNR Margins & Line Attenuation?

The Ipconfig/all as below.

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom Netlink (TM) Gigabit Ether

Physical Address. . . . . . . . . :
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 203.94.243.70
59.179.243.70

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Netwo

Physical Address. . . . . . . . . :
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.10.0.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.0.1
DHCP Server . . . . . . . . . . . : 10.10.0.1
DNS Servers . . . . . . . . . . . : 10.10.0.1
192.168.1.1
203.94.227.70

----------

Hi essbebe,

First I'm tryig to connect to internet using only Sterlite router, but I'm not being able to do so.

Here are the answers to your queries:

1.Set up SamAX300 in "Always On" mode. Yes
2.Enable DHCP in modem Yes, done
3. test computer is connected to Internet. Not connected

----------

Hi Socrates,

As you said I'm trying to connect to the internet using only Sterlite modem. The settings as I have posted in the link above. Still I'm unable to get the adsl signal.

How shall I check SNR Margins & Line Attenuation?

The Ipconfig/all as below.

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ether

Physical Address. . . . . . . . . :
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 203.94.243.70
59.179.243.70

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Netwo

Physical Address. . . . . . . . . :
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.10.0.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.0.1
DHCP Server . . . . . . . . . . . : 10.10.0.1
DNS Servers . . . . . . . . . . . : 10.10.0.1
192.168.1.1
203.94.227.70

----------

Hi essbebe,

First I'm tryig to connect to internet using only Sterlite router, but I'm not being able to do so.

Here are the answers to your queries:

1.Set up SamAX300 in "Always On" mode. Yes
2.Enable DHCP in modem Yes, done
3. test computer is connected to Internet. Not connected

Here I'm trying to connect to internet using Sterlite in PPOE LLC mode first.
No problem in the line. The MTNL perosn came in the morning & checked with other modem (white one) he got the ADSL link easily. So I changed the modem. But the problem persists. Now first I'm trying to connect using only PPOE.

----------

Hi,

Am I missing any configuration parameters in SAM300AX?
:huh:
 
Hi Socrates,

Thanks for such valuable links....I made the changes as per the set up instructions. But still I'm unable to connect. Still it connects after 2 hours or so....
Thinking of buying a new modem....

----------

Does anybody faced such issues before?
 

Similar threads

P
Sterlite SAM300AX and Netgear WGR614
Replies
0
Views
2,377
pranayreloaded
P
Sterlite SAM300AX and Netgear WGR614
Replies
1
Views
2,654
linuxsims
K
Sterlite SAM300AX (Unable to forward Port)
2
Replies
12
Views
6,959
superprash2003
K
Need Boradband Internet on all 4 Port of "sterlite sam300ax"
Replies
2
Views
3,011
kapoorabhishek2
Back