How do I enable bridge mode in this thing?

[!!..PD..!!]

People are using gr6011 for bridge and they're successful. Must be some error in configuration.
Vlan configured in onu bridge profile.
MAC address can be verified from selfcare portal BB usage history.

 

[a.banerjee]

The selfcare portal in the Kolkata region doesn’t offer this option, at least for me. Already tried VLAN configuration in ONU bridge profile.

ONU Configuration

Router Configuration

 

[!!..PD..!!]

I'm out right now. Will check around 9:15

 

[!!..PD..!!]

@a.banerjee Can you show me the dropdown for ipv6 (dynamic ip)? Also, select non-address for ipv6 connection.

Do paste the log from router as well!

 

[a.banerjee]

IPv6 dropdown

Error

 

[!!..PD..!!]

Ipv6 connection pppoe.
Non address. Rest seems fine. Save the configuration.

ONU:
Check the pppoe profile WAN mac when you set it in route and internet works. (we use this mac on router).
Make sure that this WAN mac is not used by the bridge profile when you create it and delete pppoe profile.

 

[a.banerjee]

@!!..PD..!! The issue has been resolved. The problem was that the bridge profile was using the WAN MAC. To fix this, I created a new bridge profile while keeping the existing route profile, and this time, it received a new MAC. Then I deleted the route profile.

For IPv6: Via SLAAC is working fine.

IPv4
IPv6

Thanks a lot for your help and support.

 

[!!..PD..!!]

Been through the same issue 2 years ago.
WAN mac was the culprit that time so I mentioned that first.
Also, TP-Link router had some issues with slaac at that time for my location. Non address worked but rest didn't work. Maybe the old BNGs used that but the new Nokia ones didn't.

Note: If you save and upload the current bridge configuration. WAN MAC will change back to the pppoe one so make sure you set it up again.