How to Authenticate a TP-Link ONT While Bypassing the JioFiber Router?
- Thread starter kbhatt
- Start date
- Featured
- Replies 1,167
- Views 120,725
@nishantt6969 , If you got telnet access on your jiofiber router?
If yes then command will be gponmgr get info.
If yes then command will be gponmgr get info.
I am using this particular onu with Airtel. A few things from my observation -
1. This onu has serial address spoofing, PLOAM id pass spoof, manufacturer spoof.
2. Mac address is not part of GPON OMCI, only gpon SN. So mac spoofing is useless
3. There is no tr069 management interface for this router which is good.
4. This router has only bridge mode available. No routing mode or pppoe connection mumbo jumbo.
5. Spi interface is pretty standard.
1. This onu has serial address spoofing, PLOAM id pass spoof, manufacturer spoof.
2. Mac address is not part of GPON OMCI, only gpon SN. So mac spoofing is useless
3. There is no tr069 management interface for this router which is good.
4. This router has only bridge mode available. No routing mode or pppoe connection mumbo jumbo.
5. Spi interface is pretty standard.
@airforce oh , telegram url (t.me) is not working so there is a new TG link :- Telegram: Contact @kunalb
Last edited:
@conquest
Umm, i could not find this GPON omci information on my jiofiber router where i have access telnet... How can I find it?
I guess there is a omci information on TP-Link ont like vendor ID , GPON Serial Number, ONT version , Equipment ID etc. Is that correct?
Here is a video i followed this step by step and got it basic configuration. youtu.be/hPedTKrreEA
Umm, i could not find this GPON omci information on my jiofiber router where i have access telnet... How can I find it?
I guess there is a omci information on TP-Link ont like vendor ID , GPON Serial Number, ONT version , Equipment ID etc. Is that correct?
Here is a video i followed this step by step and got it basic configuration. youtu.be/hPedTKrreEA
@conquest , i got internet while changing my TP-Link ont information
1) GPON SN
2) GPON Password
3) VLAN Id (set to default:- Control via OLT)
Acess another page onu_sn.htm and got it so I have cloned my router information for the following:-
-------------------------------------------------------------------------
5)Change Vendor ID :- SCOM like company name sercomm
6) Serial Number is Same like GPON SN
7) ONT Version like jiofiber Router name.
8) Main and Standby Software Version like jiofiber router firmware version .
9) Card holder type :- Leave to default settings.
10) Equipment ID:- i don't know
11) OMCC Version :- set to default or i don't know.
12) Traffic Management Option:- Leave to default settings.
And then I saved to my information settings , so Main and Standby Software Version is not saving properly.
So everything is okay
And then I have to configure pfsense WAN connection
1) Clone the Router MAC address
2) Add and then Clone the GPON VLAN ID.
Volia it's working So I have got it my jio WAN IP address... So everything is working right now...
Why my speed is not good due to fluctuating...?
Here is my video I made it check post #4
broadband.forum
1) GPON SN
2) GPON Password
3) VLAN Id (set to default:- Control via OLT)
Acess another page onu_sn.htm and got it so I have cloned my router information for the following:-
-------------------------------------------------------------------------
5)Change Vendor ID :- SCOM like company name sercomm
6) Serial Number is Same like GPON SN
7) ONT Version like jiofiber Router name.
8) Main and Standby Software Version like jiofiber router firmware version .
9) Card holder type :- Leave to default settings.
10) Equipment ID:- i don't know
11) OMCC Version :- set to default or i don't know.
12) Traffic Management Option:- Leave to default settings.
And then I saved to my information settings , so Main and Standby Software Version is not saving properly.
So everything is okay
And then I have to configure pfsense WAN connection
1) Clone the Router MAC address
2) Add and then Clone the GPON VLAN ID.
Volia it's working So I have got it my jio WAN IP address... So everything is working right now...
Why my speed is not good due to fluctuating...?
Here is my video I made it check post #4
Successful Authentication TPlink ONT without original jiofiber. | Reliance JioFiber
I have now successful authentication with third party ont - TP-Link xz000-g3 gpon ont to pfsense (my pc) without original jiofiber router . Then Internet is working fine. So there is problem 😔 speed is not good because of fluctuations... Is there is problem with TPlink or pfsense configuration...
broadband.forum
Last edited:
