How to Authenticate a TP-Link ONT While Bypassing the JioFiber Router?

[kbhatt]

I have now successful authentication with third party ont - TP-Link xz000-g3 GPON ont to pfsense (my pc) without original jiofiber router . Then Internet is working fine.
So there is problem speed is not good because of fluctuations... Is there is problem with TPlink or pfsense configuration so how to fix it?

 

[kbhatt]

I got it from my own TP-Link ont without jiofiber to authenticate Jio server.

TP-Link web ui:-
1) change GPON sn
2) change gpon password
3) set vlan default settings (control via OLT)

i must change pfsense web ui configuration

1) To clone mac address from WAN configuration
2) Add gpon vlan id
2) and create a new OPT1 auto DHCP ip
3) Enable interface OPT1.

And volia I got it jio ip address...
It is working..
Then speed test is not good...
Wired thing....


Here is my speed test on TP-Link ont...



Source
And another one
Speed test (fast.com) on TP-Link ont.


But Wired thing ...

More upload speed
Then download speed maybe fluctuating...

So is there is something missing in tplink ont or pfsense configuration?
Then i would like to appreciate that.

 

[imdarkray]

Have you configured WAN IPV6 to DHCP6 and your LAN IPV6?

 

[kbhatt]

Here is downloading speed test very fluctuating on tplink ont without original jiofiber video.

 

[kbhatt]

I think it on TP-Link XZ000-G3 doesn't have IPv6, but only IPv4 .
Then Any idea?

 

[imdarkray]

You will have to do this on PFsense.
I assume you have put your TP-Link XZ000 on bridge.

 

[kbhatt]

Bridge mode on TP-Link xz000-g3? How to do that?
I mean that tplink -> pfsense WAN (my pc) and pfsense LAN (my pc) -> Jiofiber repeater. Right?
Yes , on pfsense i have configured via tplink to WAN and added vlan id , then i got wan jio ip (ipv4 only) address and got and got jio ipv4 public address..
And internet is working... Everything is fine.... I have ping to 1.1.1.1 and ping is responding to 55ms... And it is good...
Now I tired to download test then still speed is not good due to fluctuating like DL :- 35-50 and UL :- 80-95... Something wrong....

Any idea..?

 

[conquest]

@kbhatt this onu has bridge mode only. Bridge mode has nothing to with ip4 or ip6.

 

[markiv]

Test it without Pfsense, by directly plugging into PC, if there are still fluctuations then you can try changing OLT controlled ONT to manually controlled ONT

 

[AD2011]

@kbhatt where did you get the GPON password and the gpon vlan ID (to be set in pfsense)?