How to Get Maximum Speed on 2.4 Ghz

[igloo]

Yes. Thats true. on my laptop i get 90 mbps with 2.4 Ghz. But on my Samsung A50, i get only 40 to 50 mbps.

Only if i connect to 5 ghz i get above 100 mbps speed. I problem with 5 ghz is that it wont cover whole house. Its coverage is less compared to 2.4 ghz.

Thats where mesh router workaround. my whole house is covered with 2 routers with blanket 5ghz coverage. all portable device roam on 5ghz only.

 

[Rickysin]

Try selecting only 802.11n standard and 40 mhz.

802.11b/g are very old standards and very few devices use those standard, So you can select only 802.11n standard and 40 mhz and check

Already done that. No change

 

[soorajskn]

Thats where mesh router workaround

I have TP-Link router with 2.4 ghz. so i am using that as wireless repeater. That's why i was looking to increase 2.4 ghz speed

I dont want to invest in buying another router. looking for cheaper workaround

 

[Stm444]

I am using Poco X3. Speeds were upto 90mbps on 144 mbps link speed. So was thinking if it would improve if I move to 200 mbps plan.

Never, For a link speed of anything upto 150mbps, mac actual speeds doesn’t exceed 105-110 mbps, that too in very favourable conditions. Ex: Very few interference/less 2.4Ghz based devices in home etc.

Even if you are on 300mbps plan or 1gbps the 2.4 Ghz speeds are maxed out at 110mbps for 150mbps link speed.

 

[imdarkray]

I get 300mbps link speed on my laptop with TP-Link 2.5Ghz band.
You can get the router mentioned link speed.but not the exact total output.

 

[meh]

U can't get above 60 Mbps under 5 GHz no matter wat u do . Get a small 5 GHz adapter it's not very expensive . It's better than wasting ur money 120 Mbps , that must cost a lot more than buying one 5ghz adapter a single time

 

[soorajskn]

Now I'm getting up to 90 mbps on my laptop with 2.4 ghz .

 

[pillaicha]

I get 300mbps link speed on my laptop with TP-Link 2.5Ghz band.
You can get the router mentioned link speed.but not the exact total output.

That’s a 4x4 MIMO config on both ends: router and laptop. All iPhones support 2x2 only so far. So maximum expected speeds on iPhones don’t exceed 110Mbps on 2.4Ghz.

 

[Jonas]

@soorajskn How did that happen?

 

[Tejas01]

@Samuel

How to Get Maximum Speed on 2.4 Ghz | Airtel Xstream Broadband

Hello All, I am using Airtel fiber and i get 120 mbps speed on 5Ghz but on 2.4 Ghz i only get 40 mbps speed. As per the 802.11n standard maximum achievable speed is 150 mbps. But i get only 40 mbps Anyone knows the settings to achieve higher speed? This is my router settings.

broadband.forum

Also worked in my case after changing from 20mhz to 40 ghz. It also depends on the device and the link speed.