How to setup bridge mode in Reliance Jio Fiber router?

[crymetyme]

I am not sure what actually this bridge mode is or how it works,i just read in this thread that if its ticked in the configuration page that means it is active.
How can i check whether my other router fetched the ip or not?

 

[GR2]

@crymetyme what router do you have?.

 

[crymetyme]

Actually i am coming from adsl connection so have only the old adsl routers although i have ordered one TP-Link C6,as of now i have D-Link 2750u,dlink dap-1330,mi 3c.
Are you also able to get the bridge mode tick in your jio routers By putting any numbers in vlan id

 

[GR2]

@crymetyme Nope. It doesn't work for me and i get tick too. Which router is connected to jio's modem?.

 

[crymetyme]

As of now i have connected mi 3c as a wireless repeater and also D-Link dap 1330 and tomorrow i will connect all of them through lan as i have bought a lan cable to be wired in the entire house,so after connecting them what do i need to check and how can i check it.

 

[GR2]

I am not sure what actually this bridge mode is or how it works

Oh i didn't read it. Just google about it.

 

---

[aakshey]

Just run in double nat mode. Not an issue for homes.

 

[harshanand]

Does using VLAN 0 for bridged mode work. Can someone check

 

[GR2]

@harshanand No. You can't input 0 in vlan tag on jio modem. Values allowed are between 2-4094

 

[Rithveek]

@coolsam07, Person who install jio ONT are hardware person. There knowledge is limited to regular installation only. You talk to technical person who is at server end. For that ask installation person to give name and contact of person who is at server end. Have word with them and ask them to disable DHCP at server end, as you want ONT as modem not router. (because you have your own router wherein you have functionality like VPN, DDNS and your own firewall.) Once DHCP is disabled from server end of your ONT connection, you can configure to Bridge Mode thus you doesn't have Double NAT enviorment.

Hey, even if the dhcp is disabled, than how should we set bridge mode ? Csn u pls explsin the step by step process, as it also asks for vlan id ?