How to use static IP with bridged mode?

[ceyen]

Sure, I've masked the last 2 octets of my IP.


##########################################################################
# Archer C6 System Log
# Time = 2024-10-05 17:25:33 412s
# H-Ver = Archer C6 4.0 : S-Ver = 1.12.10 Build 230208 Rel.38553n(5553)
# L = 192.168.0.1 : M = 255.255.255.0
# WAN = STATIC IP : W = 122.166.xxx.xxx : M = 255.255.252.0 : G = 122.166.xxx.xxx
# Cnt = 10624, Free = 10545, Busy = 79
##########################################################################
0days, 00:05:43, [wan]Wan type change from PPPoE to STATIC IP
0days, 00:05:43, [ppp][LCP]TX TERMINATION_REQUEST
0days, 00:05:43, [ppp][LCP]RX TERMINATION_ACK
0days, 00:05:43, [pppoe]RX PADT
0days, 00:05:44, [pppoe]TX PADT[session=42ee]
0days, 00:05:44, [wan]advanced ddns -wanChanged
0days, 00:05:45, [wan]STATIC-IP: eth0 set ip 122.166.xxx.xxx mask 255.255.252.0 gateway 122.166.xxx.xxx.
0days, 00:05:45, [wan]advanced ddns -wanChanged
0days, 00:05:45, [wan]systool sntpc -sntpRequest
0days, 00:05:45, [dnsproxy]Register Dns Detect
0days, 00:05:45, [dnsproxy]Register primary = 0x7d2f167d, secondary = 0x8080808
0days, 00:05:45, [inetd]INETD: select error, abort.
0days, 00:05:45, [cwmp]cwmp is not start

 

[ceyen]

@tr1k0N4 , since you are using the similar setup as me. G3 V1 + Airtel(static IP). can you share your G3 Vlan mode settings and your router settings for static ip.

Appreciate if you could DM me as well, i'm a new member here.

 

[tr1k0N4]

Will share ASAP, brdr