HSGQ ODI / DFP-34X-2C2 GPON ONU SFP
- Thread starter anmolbhard004
- Start date
- Replies 110
- Views 21,518
anmolbhard004
Resonating
Yeah this is something I’ve observed as well, basically what happens is, to keep customer side VLAN constant, there is a mapping of the real VLAN to the customer side VLAN (which is always 100 in case of Airtel). So the real VLAN varies with each area. Ideally this mapping is done automatically as part of a OMCI message from the OLT to ONT and is handled transparently. But in some ONTs maybe due to compatibility issues this mapping doesn’t happen, and you’d need to find out the real VLAN and use it.
If there is an OMCI client available on the ONT you can use that to find the real VLAN as well. I had written about my experience finding the real VLAN in another post.
broadband.forum
If there is an OMCI client available on the ONT you can use that to find the real VLAN as well. I had written about my experience finding the real VLAN in another post.
How to Connect TP-XZ000-G7 to Airtel Xstream Broadband?
Got the Digisol DG-GR6011 earlier today, this is just a rebrand of the VSOL HG322G. Same model is available from Netlink, DBC, Syrotech etc too. The web UI doesn't support changing the GPON serial, but can be done from the shell. Enable ssh access from Security --> Login Privilege, after that...
broadband.forum
@MrGordon Another thing I noticed is that I needed to be in PPPoE mode for my VSOL to discover VLAN. It showed empty VLAN in bridge mode.
Some Alcatel (Nokia) OLTs need more info like HW Manufacturer 4 letters, ONU Software version and HW Revision to be able to reach O5 Certified state of PON. Then only the VLAN can be discovered by 171 command.
In short, you are using VSOL or HSGQ ONUs based on Realtek chipset and your FTTH service provider is using Alcatel OLTs, you need to clone as much Hardware info of ISP provided Gateway/ONT/ONU to be successful.
Some Alcatel (Nokia) OLTs need more info like HW Manufacturer 4 letters, ONU Software version and HW Revision to be able to reach O5 Certified state of PON. Then only the VLAN can be discovered by 171 command.
In short, you are using VSOL or HSGQ ONUs based on Realtek chipset and your FTTH service provider is using Alcatel OLTs, you need to clone as much Hardware info of ISP provided Gateway/ONT/ONU to be successful.
i noticed this part in the config file of my PMG5617 ZyXEL
Code:
<Mos>
<X_5067F0_OMCI_Vlan_Info>
<i1>
<uniPbitMappingAni_7 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">7</uniPbitMappingAni_7>
<uniPbitMappingAni_6 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">6</uniPbitMappingAni_6>
<uniPbitMappingAni_5 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">5</uniPbitMappingAni_5>
<uniPbitMappingAni_4 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">4</uniPbitMappingAni_4>
<uniPbitMappingAni_3 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">3</uniPbitMappingAni_3>
<uniPbitMappingAni_2 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">2</uniPbitMappingAni_2>
<uniPbitMappingAni_1 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">1</uniPbitMappingAni_1>
<uniPbitMappingAni_0 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">0</uniPbitMappingAni_0>
<AniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">931</AniVlanId>
<UniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">660</UniVlanId>
</i1>
<i2>
<uniPbitMappingAni_7 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_7>
<uniPbitMappingAni_6 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_6>
<uniPbitMappingAni_5 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_5>
<uniPbitMappingAni_4 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_4>
<uniPbitMappingAni_3 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_3>
<uniPbitMappingAni_2 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_2>
<uniPbitMappingAni_1 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_1>
<uniPbitMappingAni_0 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_0>
<AniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">931</AniVlanId>
<UniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">660</UniVlanId>
</i2>
<i3>
<uniPbitMappingAni_7 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_7>
<uniPbitMappingAni_6 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_6>
<uniPbitMappingAni_5 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_5>
<uniPbitMappingAni_4 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_4>
<uniPbitMappingAni_3 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_3>
<uniPbitMappingAni_2 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_2>
<uniPbitMappingAni_1 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_1>
<uniPbitMappingAni_0 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">8</uniPbitMappingAni_0>
<AniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">3411</AniVlanId>
<UniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">100</UniVlanId>
</i3>
<i4>
<uniPbitMappingAni_7 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">7</uniPbitMappingAni_7>
<uniPbitMappingAni_6 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">6</uniPbitMappingAni_6>
<uniPbitMappingAni_5 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">5</uniPbitMappingAni_5>
<uniPbitMappingAni_4 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">4</uniPbitMappingAni_4>
<uniPbitMappingAni_3 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">3</uniPbitMappingAni_3>
<uniPbitMappingAni_2 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">2</uniPbitMappingAni_2>
<uniPbitMappingAni_1 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">1</uniPbitMappingAni_1>
<uniPbitMappingAni_0 PARAMETER="configured" TYPE="sint7" MAX="11" MIN="-1">0</uniPbitMappingAni_0>
<AniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">3411</AniVlanId>
<UniVlanId PARAMETER="configured" TYPE="sint31" MAX="4099" MIN="-1">100</UniVlanId>
</i4>
<i5>
</i5>
<i6>
</i6>
<i7>
</i7>
<i8>
</i8>
</X_5067F0_OMCI_Vlan_Info>I have plugged HSGQ stick in my ubiquiti switch. It shows up fine but there is no temperature.
I dont have a APC fiber cable plugged into it yet. Is the stick supposed to show a temperature? @anmolbhard004
Code:
(UBNT EdgeSwitch) #show fiber-ports optics-info 0/1
Link Link Nominal
Length Length Bit
50um 62.5um Rate
Port Vendor Name [m] [m] Serial Number Part Number [Mbps] Rev Compliance
-------- ---------------- --- ---- ---------------- ---------------- ----- ---- ----------------
0/1 HSGQ 0 0 XPON24050XXX HSGQ-XPON-Stick 1200 000 Unknown
(UBNT EdgeSwitch) #show fiber-ports optics 0/1
Output Input
Port Temp Voltage Current Power Power TX LOS
[C] [Volt] [mA] [dBm] [dBm] Fault
-------- ---- ------- ------- ------- ------- ----- ---
0/1 N/A N/A N/A N/A N/A Yes No
Temp - Internally measured transceiver temperatures.
Voltage - Internally measured supply voltage.
Current - Measured TX bias current.
Output Power - Measured optical output power relative to 1mW.
Input Power - Measured optical power received relative to 1mW.
TX Fault - Transmitter fault.
LOS - Loss of signal.I dont have a APC fiber cable plugged into it yet. Is the stick supposed to show a temperature? @anmolbhard004
anmolbhard004
Resonating
Can someone please provide me with the HSGQ-XPON-Stick (APC) v8 SPI Flash .bin file, my SFP had got bricked so I fixed it with the ODI modified SPI bin file but I want the unmodified SPI bin file which came with the sfp.
Or can anyone please provide me with their SFP MTD backup files who is having the same SFP Stick so I can restore it.
Or can anyone please provide me with their SFP MTD backup files who is having the same SFP Stick so I can restore it.
Last edited by a moderator:
Similar threads
