Migrating from PPPoE to Dialer on VISTA

[dOne]

I'm using PPPoE connection as of now, I want to migrate to Dialer mode. Can any body provide process how to do this? My OS is Vista so cannot use RASPPPoE. Before posting this question i have searched forum but there is no proper response. Any help??

 

[amitwiz1]

Please mention you modem type so I can tell you in detail.

 

[cum_trishna]

reset your modem to factory default setting and then follow this link:

Creating a new Broadband Connection Windows Vista

 

[essbebe]

1.In modem/router in wan page check "Bridged"
rest all same. Save Reboot . wait for two minutes.

2.StreamyxZone-Help Desk For Broadband and Networking: Vista Dialer
1.Go to Control Panel>Network and Sharing

Center>Click 'Set Up A Connection or Network'

2 Choose 'Connect To The Internet'

3. There will be 3 choices which are Wireless,

Broadband and Dial-Up. As for now, I will show the

steps for creating a manual dialer for broadband

connection.

4. Key in your username@ISP and your password

and click Connect.

5.5.DONE!

6Then, for the DNS setting as well as to change the
setting for your IP address, subnet mask and
default gateway,just follow these simple
step.
see link.
http://streamyxzone.blogspot.com/2008/10/vist-dialer.html

 

[dOne]

Please mention you modem type so I can tell you in detail.
Modem is D-Link GLB 502T

 

[cum_trishna]

[*]Open your browser (preferably Internet Explorer ) and goto http://192.168.1.1/
[*]Input as follows
[/list]USERNAME: admin
PASSOWRD: admin


[*]Now goto setup Tab then click on new connection (see left)
[/list]


[*]Now fill the details as follows
[/list]Name - BSNL
Type - bridge
Sharing - disable
VLAN ID: 0
Priority Bits:0
Encapsulation :LLC
Select LAN:LAN GROUP 1
PVC:new
VPI-0
VCI -35
Leave all others at default values Then click apply



[*]The go to TOOLS tab
[*]Click “system command” (left hand side)
[*]Click “save all”
[/list]


[*]Apply and restart the modem.
[/list]

 

---

[essbebe]

D
h t t p://www.D-Link.co.in/GLB502T_Guide_modified/index.htm

 

[dOne]

D
h t t p://www.D-Link.co.in/GLB502T_Guide_modified/index.htm

Thanks everyone for your help and now problem is solved.
Using following links suggested by members problem is resolved.

StreamyxZone-Help Desk For Broadband and Networking: Vista Dialer
D