shatrughan
Regular
MTNL Broadband: Shift to Bridged Mode on Sterlite SAM300 AX
Hi, This tutorial is mainly for those people who don't know how to create a Bridged Mode for ADSL Modem Sterlite SAM300 AX
1. Open the Router page (192.168.1.1)
2. Click on quick start and then Run Wizard
3. Enter the password which u want ( i have entered the default password admin)
4. Next
5. select Bridge mode
6. Next
7. Next
8.Close
9. Now select interface setup ---->
10. Select Lan And Disable DHCP and Save
After having followed all these above steps. We need to create a new connection which supports Bridge mode.
Here's how you do it
1. Go to Control Panel--> Network Connections---> Create a New connection
http://img26.imageshack.us/img26/2905/newconnect1.jpg
2. A New connection Wizard will pop up. You need to configure it so as to get an access to internet.
http://img149.imageshack.us/img149/2937/newconnect2.jpg
3. Select the option "Connect to Internet and click on Next
http://img91.imageshack.us/img91/9919/newconnect3.jpg
4. Choose the option "Setup the Connection Manually then click on next.
http://img27.imageshack.us/img27/7662/newconnect4.jpg
5. Choose the option "Connect using Broadband connection that requires username and password
http://img22.imageshack.us/img22/86/newconnect5.jpg
6. Enter the ISP name
http://img21.imageshack.us/img21/377/newconnect6.jpg
7. Enter your Useraccount Details(In case of MTNL its the Telephone number as your username and password you are using everywhere.)
http://img254.imageshack.us/img254/1762/newconnect7.jpg
8. Thus your bridge mode has setup and ready surf in it. Set up a shortcut connection and desktop and hit connect.
Here's some settings you need to make when you disable the DHCP
1. Go to Control Panel--> Network Settings
http://img38.imageshack.us/img38/7221/connectionsettings01.jpg
2. Click on the Actual MTNL connection(Main connection) Not the newly created one and select properties
http://img36.imageshack.us/img36/706/connectionsettings02.jpg
3. Then, on the General Tab select the Internet Protocol( Tcp/Ip) and click on Properties
http://img40.imageshack.us/img40/25/connectionsettings1.jpg
4. On the properties pages, enter your Ip address and other details. In this case i am using Open dns. You can also Mtnl's Dns server address.
http://img34.imageshack.us/img34/2826/connectionsettings2.jpg
Note: You should have an up-to-date antivirus software and a good firewall to block out threats as it does up all your ports.
use the username which have been provided to u
22228769 or
28547987@a (for new connection)
Hi, This tutorial is mainly for those people who don't know how to create a Bridged Mode for ADSL Modem Sterlite SAM300 AX
1. Open the Router page (192.168.1.1)
2. Click on quick start and then Run Wizard
3. Enter the password which u want ( i have entered the default password admin)
4. Next
5. select Bridge mode
6. Next
7. Next
8.Close
9. Now select interface setup ---->
10. Select Lan And Disable DHCP and Save
After having followed all these above steps. We need to create a new connection which supports Bridge mode.
Here's how you do it
1. Go to Control Panel--> Network Connections---> Create a New connection
http://img26.imageshack.us/img26/2905/newconnect1.jpg
2. A New connection Wizard will pop up. You need to configure it so as to get an access to internet.
http://img149.imageshack.us/img149/2937/newconnect2.jpg
3. Select the option "Connect to Internet and click on Next
http://img91.imageshack.us/img91/9919/newconnect3.jpg
4. Choose the option "Setup the Connection Manually then click on next.
http://img27.imageshack.us/img27/7662/newconnect4.jpg
5. Choose the option "Connect using Broadband connection that requires username and password
http://img22.imageshack.us/img22/86/newconnect5.jpg
6. Enter the ISP name
http://img21.imageshack.us/img21/377/newconnect6.jpg
7. Enter your Useraccount Details(In case of MTNL its the Telephone number as your username and password you are using everywhere.)
http://img254.imageshack.us/img254/1762/newconnect7.jpg
8. Thus your bridge mode has setup and ready surf in it. Set up a shortcut connection and desktop and hit connect.
Here's some settings you need to make when you disable the DHCP
1. Go to Control Panel--> Network Settings
http://img38.imageshack.us/img38/7221/connectionsettings01.jpg
2. Click on the Actual MTNL connection(Main connection) Not the newly created one and select properties
http://img36.imageshack.us/img36/706/connectionsettings02.jpg
3. Then, on the General Tab select the Internet Protocol( Tcp/Ip) and click on Properties
http://img40.imageshack.us/img40/25/connectionsettings1.jpg
4. On the properties pages, enter your Ip address and other details. In this case i am using Open dns. You can also Mtnl's Dns server address.
http://img34.imageshack.us/img34/2826/connectionsettings2.jpg
Note: You should have an up-to-date antivirus software and a good firewall to block out threats as it does up all your ports.
use the username which have been provided to u
22228769 or
28547987@a (for new connection)