Mtnl or modem problem god knows

[rahuldj]

Hi,

I have mtnl night plan and i am facing this unusual problem with my modem now. God knows its mtnl or it is the modem. My problem goes like this.

When i power on my computer and modem. The modem power light is on , lan light is on but the adsl light is continiously blinking and pppoe is off. I tried to reset to factory settings reconfigure it again but still the problem persists.As per the mtnl person the problem is with modem he says that my modem is getting hanged.I guess every network device when it is powercycled boots and becomes steady.

Please let me know is this the problem with modem or mtnl. The mtnl line man came and checked the line and it is working fine no problem with the line.

Here are the logs from the http://192.168.1.1 site.

Could not get oam_ping_interval from boot loader env
Trying to retreive the value from Configuration
oamPingInterval(20)(20)
Valid Configuration Tree
stat successfull for /etc/resolv.conf.
Resolver Polling Timer Started succesfully.
DSL Polling Timer Started succesfully.
Firewall NAT service started
del_iptable_rules : ppp_name not intact
updateall_servers : No children found for conn:
Bridge Created: br0
Bridge Created: br1
Bridge Interface Added: eth0
Bridge Interface Added: usb0
DSL Carrier is down
DSL Carrier is training
del_iptable_rules : ppp_name not intact
instantiate_module: no module 'upnp' registered
endElement: couldn't instantiate the module 'upnp'
instantiate_module: no module 'routed' registered
endElement: couldn't instantiate the module 'rip'
instantiate_module: no module 'sntp' registered
endElement: couldn't instantiate the module 'sntp'
Could not get oam_ping_interval from boot loader env
Trying to retreive the value from Configuration
oamPingInterval(20)(20)
stat successfull for /etc/resolv.conf.
Resolver Polling Timer Started succesfully.
DSL Polling Timer Started succesfully.
Firewall NAT service started
Bridge Created: br0
updateall_servers : No children found for conn:
Bridge Created: br1
Bridge Interface Added: eth0
Bridge Interface Added: usb0
DSL Carrier is down
manager_get_defaults - !node
manager_get_defaults - !node
Valid Configuration Tree
PPPoE Apply Transaction
PPPoE Current State = 2
PPPoE Apple Code = 1
PPPoE ReStart Flag = 0
PPPoE Relaunch = 0
PPPoE Apply Message
PPPoE Current State = 2
PPPoE Relaunch Flag = 0
PPPoE AFTER Apply Transaction
PPPoE Current State = 2
PPPoE Apple Code = 0
PPPoE ReStart Flag = 0
PPPoE Relaunch = 0
del_iptable_rules : ppp_name not intact
del_iptable_rules : ppp_name not intact
del_iptable_rules : ppp_name not intact
Saving on Apply
Could not get oam_ping_interval from boot loader env
Trying to retreive the value from Configuration
oamPingInterval(20)(20)
Valid Configuration Tree
stat successfull for /etc/resolv.conf.
Resolver Polling Timer Started succesfully.
DSL Polling Timer Started succesfully.
Firewall NAT service started
del_iptable_rules : ppp_name not intact
updateall_servers : No children found for conn:
Bridge Created: br0
Bridge Created: br1
Bridge Interface Added: eth0
Bridge Interface Added: usb0
DSL Carrier is down
DSL Carrier is training
del_iptable_rules : ppp_name not intact

Team help me please.

 

[neevarp]

Did he test the line with another modem?

 

[essbebe]

Mention modem make. Confirm connecting in "DIALUP" bridged mode or "Always On PPP/PPPoE mode. Post details from modem page (ADSL settings) showing snr/attn/Mod selected /line speed .Para two : I think you have selected wrong setting in WAN page. VPI VCI 0 and 32 for MTNL.

 

[superprash2003]

i have a feeling there is something wrong with the modem.. ADSL led constantly blinking is totally weird..

 

[ayuboy]

I agree with superprash!or there is a chance of line prob

 

[sandeep_joshi]

keep complaining similiar case happened with my modem as well long time back , turned out to be a line problem Incidentally I was also told by the linesman that the line was fine , don't beleive them , just keep complaining till the problem is solved :thumbsup:

 

---

[essbebe]

Mahanagar Telephone Nigam Ltd.. Delhi
Check whether your modem is listed in right side bottom under "modem cpe configuration "Download relevant doc or user manual.

 

[drmulchandani]

Dude I had exactly the same prob. I think its a line prob cause without doing anything after 2 days my modem is now working fine.

 

[essbebe]

member/drmulchandani/"out of thread "Your participation/contributions in new forum Health requested. Thanks.

 

[rahuldj]

guys thanks for your response. called D-Link for modem and my issue got solved it was problem with configuration trust me if you have modem problems call the modem making company tech support these are professionals and not mtnl these are dumb idiots.