Mtnl triband speed is reduced if constant disconnection is observed

[ajsmart]

Ur SNR and Att Numbers??????



SNR Margin (dB): 30.3 15.0
Attenuation (dB): 25.0 14.0

 

[viralbug]

your stats are good.your upload speed also seems to be fine.are you sure that you are synced to 2048 kbps? try running the speed test some other time. my speed tests fluctuate a lot.

 

[ajsmart]

i dunno whts up with mtnl?? i cant get speeds more than 25-30 kbps....

my g.dmt is enabled and my 849 plan has been activated today itself. i cant clock more than 256 kbps

https://www.speedtest.net




Damn!!! wht can be the problem??:madness:

 

[skorpio1]

SNR and ATT stats after the upgrade???????????
These look like the figures before the upgrade

Also if u have the UTstar300R2U look at this page
http://192.168.1.1/main.html
Under
DEVICE INFO -> STATISTICS -> ADSL

You should see this data
Downstream Upstream
SNR Margin (dB):
Attenuation (dB):
Output Power (dBm):
Attainable Rate (Kbps):
Rate (Kbps):


Attainable rate is a far better indicator of line and speed conditions rather than what you are synced at the exchange,coz thats as far as ur router can take u on those line conditions at that time

 

[max]

SNR has nothing to do with it. Okay maybe a little but the real trouble is at 2Mbps the line should be able to sustain the rate. My SNR is 43dB and yet in Jan when I got 2Mbps my line was facing severe disconnection trouble.Anyway, if you get such problems then the solution doesn't lie in reducing the speed ( what MTNL is currently doing ). The solution lies in changing your line from the junction box till your ADSL router. MTNL does this freely and you gotta make them do it!

 

[ajsmart]

SNR and ATT stats after the upgrade???????????
These look like the figures before the upgrade

Also if u have the UTstar300R2U look at this page
http://192.168.1.1/main.html
Under
DEVICE INFO -> STATISTICS -> ADSL

You should see this data
Downstream Upstream
SNR Margin (dB):
Attenuation (dB):
Output Power (dBm):
Attainable Rate (Kbps):
Rate (Kbps):




Attainable rate is a far better indicator of line and speed conditions rather than what you are synced at the exchange,coz thats as far as ur router can take u on those line conditions at that time




I think u r right may be i must change my line.

Just look at tht fked SNR

SNR Margin (dB):13.4 18.0
Attenuation (dB):25.0 14.0
Output Power (dBm):3.6 0.2
Attainable Rate (Kbps):2912 952
Rate (Kbps):256 256

damn!! man its(SNR) varying from 9 to 30(downstream):madness:

 

[skorpio1]

@Max^How do u make them change the Line?In My case I tried ,But the worms in MTNL wiggle out of it by saying"Line is OK till Ur Home,Ur Internal/Hidden Wiring is at fault inside ur house"When U have the internal lines changed , they say Line still OK,New wiring is also faulty/too long causing Signal Loss !!

 

[viralbug]

Attainable Rate (Kbps):2912 952
Rate (Kbps):256 256
dude, they havent upgraded your speed to 2mbps. your synced to 256 kbps. call the cc and tell them to change your speed.

 

[ajsmart]

hi! @viralbug i use bitcomet and it shows a yellow symbol stating that "u r unreachable to public domain peers,check firewall and NAT configurations of router" but my download is goin on still...is this reducin my speed??can u tell me wht to do??yeah u right i talked to the cc they said it will be done by 2maro !! thanks..!

 

[skorpio1]

"u r unreachable to public domain peers,check firewall and NAT configurations of router"
means ur ports are not being forwaded
Move to Bridge or
use the port fwd tutorial,(that usually does not work)