[New Build] Won't boot up| freezes at bios screen|GFX driver won't install

  • Thread starter Thread starter experience
  • Start date Start date
  • Replies Replies 59
  • Views Views 8,675
:001_tongue:I told you in my very first post in this thread to install on the hdd , either the problem was drivers for the ssd or the ssd is faulty , now you should install the ssd as secondary drive and run some ssd diagnostic tools to test the ssd . Do not enable ahci in the bios now, your hdd install will also get corrupt.

If it freezes at the bios screen then its a hardware issue , remove the ssd and try installing the os on the other hdd , try memtest on the each ram stick one by one , you shpuld not have bought 3x 4gb , 2x4gb is enough and this would also run in dual channel. Do you have a link for your psu , coolermaster isn't a great psu maker maybe its not good enough for your system , you should only buy corsair psus in India.
 
:001_tongue:I told you in my very first post in this thread to install on the hdd , either the problem was drivers for the ssd or the ssd is faulty , now you should install the ssd as secondary drive and run some ssd diagnostic tools to test the ssd . Do not enable ahci in the bios now, your hdd install will also get corrupt.

Thanks for that :)

But but.. I've already enabled the ahci before installing OS on the SATA HDD.
 
^ thats good , windows would have installed ahci drivers , if you would have enabled ahci after installing the OS you would have had to reinstall the os.
 
^ thats good , windows would have installed ahci drivers , if you would have enabled ahci after installing the OS you would have had to reinstall the os.
Oh gosh! :Drool (2):

What should I do now, SSD is being shown now, I've formatted it with the DISKPART, how do I proceed on installing the OS on SSD? :clapping:
 
great , now format the hdd with os on it, remove it, remove the ssd , then just plug in the ssd and proceed and keep your fingers crossed,, if the error comes up again return the ssd.
 
Back