Nokia G-140W-F bridge mode?

[Shailendra P.]

Hi Tulainas,
Right now I'm out of home. So i don't have hardware with me. But I do have the XML file you've requested in my pc , let me know how I can share.i am happy that someone else is putting so much time and efforts to achieve this.

 

[candydoodle123]

@ravenous24 AFAIK my TP-Link router is assigned a public IP and tracert does not show anything off. Unless Airtel is using CGNAT and the assigned IP is private as well then it may be a double NAT. But it's not being routed through the Nokia router at least. That has a separate IP last time I checked.

Edit 1: I checked the IP address for both the routers. The Nokia one has a 122... ip while the TP link has a 171... ip which may be a private IP. Both connect to the same gateway with 122.. ip

Edit 2: So I deleted 'TR069_INTERNET_R_VID_100' WAN profile from the Nokia router (one can use the Inspect Html tool in firefox and change disabled under fieldset to make the WAN page editable. Make delete button clickable and then click it to delete the profile. Do have a config backup incase things go south). The Nokia router now has no internet network access and only has landline profile active. And my TPlink router has a public IP which starts with 122.. So finally only my router has internet network access and the nokia router fully acts as a bridge.

The method didnt work for me. I got a Nokia 2425G, edited the html page via chrome instepction, removed the disabled tags, made the submit button clickable, but got the error "Normal user is not allowed..." i'll post a screenshot. After lot of haggling, they put LAN4 into bridge mode, but not I have 2 public IPs (one on nokia, one on my openwrt). My plan is a 300mpbs but on my openwrt its halved to 150mpbs
So basically i have bridge mode + 2 IPs + half speed.
haha... any suggestions? FWIW, i logged in using the admin user to the nokia interface.

 

[candydoodle123]

(Sorry I can't find the edit button to edit my posts) in continuation of above:
Edit 1: Here is the error that pops up now upon editing and submitting the form.

Edit 2: The speed issue is sorted. On the Nokia ONT as well as my router, i get max speed now as per the plan. But at any given point of time, total speed is capped as per the plan.
So this is all ok now.

Summary - need to call Airtel to enable bridge mode.

 

[akapur]

The method didnt work for me. I got a Nokia 2425G, edited the html page via chrome instepction, removed the disabled tags, made the submit button clickable, but got the error "Normal user is not allowed..." i'll post a screenshot. After lot of haggling, they put LAN4 into bridge mode, but not I have 2 public IPs (one on nokia, one on my openwrt). My plan is a 300mpbs but on my openwrt its halved to 150mpbs
So basically i have bridge mode + 2 IPs + half speed.
haha... any suggestions? FWIW, i logged in using the admin user to the nokia interface.

How did this issue get fixed?

I'm having the exact same problem and AIrtel can't figure it out either. I have a static IP as well.

 

[candydoodle123]

@akapur, whats your modem make model? are you running openwrt?
i have openwrt on my modem. The issue was related to "Software flow offloading" under "Routing/NAT Offloading" under Firewall. See if your modem has any similar settings. I had to enable it. I also set the MTU for the WAN PPPOE from my openwrt modem to a value greater than 1500, (1508), so that there isn't any fragmentation (just in case)

 

[akapur]

I have a PFsense firewall, let me play around and see if something happens

 

[akapur]

I have a PFsense firewall, let me play around and see if something happens

No luck. even plugged in the cable into my laptop and set the IP manually there. Still stuck at 100mbps via bridge mode. If I connect to the Nokia's wifi I get the full 300mbps speed but with a diff dynamic IP

 

[rajil.s]

@akapur It might be worth confirming that the NIC is negotiating at 1gbps. Ssh into the router and look at the ifconfig output.

 

[akapur]

@akapur It might be worth confirming that the NIC is negotiating at 1gbps. Ssh into the router and look at the ifconfig output.

Yup 1gbps at both ends

 

[rajil.s]

This is what i have set for NICs

Do you have Intel or Realtek NICs?