Hi guys,
In my quest for higher (>1.5mbps) upload speed, i settled for UL 999 40gb plan. I got a ZTE ac2739 USB modem (CDMA), which I've plugged into my router (pfsense).
my router shows below two ports on the modem, i'm confused as to which one to use :
1. /dev/cuaU0
2. /dev/cuaU1
The modem will get activated tomorrow, at present I had configured it with U0 and getting below error msg:
do not know if the USB modem is working with my router, or is it an error for wrong port or non activation.
Since the 3G interface status on the router shows up, i presume it is working.
In my quest for higher (>1.5mbps) upload speed, i settled for UL 999 40gb plan. I got a ZTE ac2739 USB modem (CDMA), which I've plugged into my router (pfsense).
my router shows below two ports on the modem, i'm confused as to which one to use :
1. /dev/cuaU0
2. /dev/cuaU1
The modem will get activated tomorrow, at present I had configured it with U0 and getting below error msg:
Code:
Nov 12 20:43:05 ppp: [opt4_link0] Link: reconnection attempt 62
Nov 12 20:43:01 ppp: [opt4_link0] Link: reconnection attempt 62 in 4 seconds
Nov 12 20:43:01 ppp: [opt4_link0] LCP: Down event
Nov 12 20:43:01 ppp: [opt4_link0] Link: DOWN event
Nov 12 20:43:01 ppp: [opt4_link0] MODEM: chat script failed
Nov 12 20:43:01 ppp: [opt4_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
do not know if the USB modem is working with my router, or is it an error for wrong port or non activation.
Since the 3G interface status on the router shows up, i presume it is working.