Router Config for Dial-Up Mode

[barani6600]

Hi

Router : Beetel 220BX ADSL 2+ Modem

I want to change my connection setup. i.e i want to make the connection by Dial up or Logging interface.By default when the Router is switched on it's get connected automatically.so i need help to change the connection from Auto to Manual.

The Default Setup of the Router is

VPI/VCI : 0/35
PROTOCOL : PPPOE
CATEGORY:UBR
SERVICE : br_1_32
ENCAPSULATION MODE:LLC-SNAP/BRIDGING


so please someone guide to get the Manual Connection for connecting to Net.Also the configuration setup of the Router/PC etc.


Thanks...

 

[essbebe]

http://i23.tinypic.com/nlpdhs.jpg
Service and VPI/VCI should tally , normally. . Are you getting connected to Internet now ?
In above page select edit
In wan page select "bridged "
UserId and password not entered here. . Save and reboot.
Para two : Use Wanminiport Dialer to enter BSNL ID and PW to connect to Internet.

 

[barani6600]

Great Reply! essbebeThanks! I setup that connection Manually with some difficulties...but u r reply is good.