I am running into an issue accessing ONT router via shell. It is giving me only a limited set of commands which can be executed on the router.
Screenshot - Terminal
The ONT SSID-2.4Ghz + password, and DNS-1 are getting reset for the router after every reboot. All the remaining settings stay the same - I had set all settings as default earlier and all but 2 mentioned previously survive reboot. I am trying to diagnose what exactly isn't getting changed in config files. TR-069 is off, so there isn't anything getting picked up from remote, right?
I have tried FTPing into the router and downloading the entire router image. But there is nothing in the entire file dump which has a stored value of SSID-1's name and/or BSNL's default DNS 61.1.1.1.
Not sure how to proceed from here. Any suggestions would be welcome.
Screenshot - Terminal
The ONT SSID-2.4Ghz + password, and DNS-1 are getting reset for the router after every reboot. All the remaining settings stay the same - I had set all settings as default earlier and all but 2 mentioned previously survive reboot. I am trying to diagnose what exactly isn't getting changed in config files. TR-069 is off, so there isn't anything getting picked up from remote, right?
I have tried FTPing into the router and downloading the entire router image. But there is nothing in the entire file dump which has a stored value of SSID-1's name and/or BSNL's default DNS 61.1.1.1.
Not sure how to proceed from here. Any suggestions would be welcome.