Wifi Router compatibility - Tenda N4 N150 Router

[deepak3030ei]

#ACT Fibernet
#ACT

Hi ,

I have a wifi router want to know if it is compatible with ACT broadband. Was told that ACT supports any DSL router. Help to figure out if "Tenda N4 N150 Router" is compatible. Please dont give generic statement that why i have posted the product specification.

I will be applying for connection next month , hence plz reply soon.


Tenda N4 N150 Router

FirewallClient, URL, MAC Filter
EncryptionWPA2-PSK, 64/128-bit WEP, WPS, WPA-PSK
Other Security FeaturesPPPoE, Dynamic IP, Static IP, PPTP, L2TP, DHCP Server, DHCP Client List, DHCP Reservation, QoS
GENERAL
BrandTenda
ModelN4 N150 Router
ControlsWPS Button, Reset Button
Installation FeaturesCD-ROM Drive
TypeWireless without Modem
LED IndicatorWPS, LAN (1 - 4), WLAN, WAN, SYS, Power
Supported SoftwareMicrosoft IE, Firefox or Safari Browser
Part NumberN150
ColorWhite
SPEED
Wireless Speed150 Mbps
LAN/WAN10/100 Mbps
POWER
Power SupplyInput: AC 100 - 240 V||50-60 Hz, 0.3 A, Output: DC 9 V, 600 mA
DIMENSIONS
Height24.76 mm
Width87 mm
Depth133 mm
WARRANTY
Domestic Term3 Years
Warranty Summary3 Years Manufacturer Warranty
SYSTEM REQUIREMENTS
Operating SystemVista, Windows: XP, Linux OS, 7, Mac OS
NETWORK FEATURES
Frequency2.4 GHz
SUPPORTED PROTOCOLS
Standard IEEEIEEE 802.3, IEEE 802.11b, IEEE 802.11g, IEEE 802.3U, IEEE 802.11n
CONNECTIVITY
Number of Antennae1
Number of LAN ports4
Antennae Capacity5 dBi Fixed Omni-directional
Number of WAN ports1
AntennaeExternal
OPERATING CONDITIONS
Operating HumidityOperating: 10 % - 90 % RH Non-condensing, Storage: 5 % - 90 % RH Non-condensing
TemperatureOperating: 0DegC - 40DegC, Storage: -40DegC - 70DegC
ADDITIONAL FEATURES
VPNVPN Pass-through (PPTP / L2TP), Virtual Server: Port Forwarding, DMZ Host
Other FeaturesWireless Security: Enable / Disable, Wireless Radio: Enable / Disable, Channel: 1 - 11, Operating Modes: Wireless Router Mode, WDS, DDNS: No-IP, Dyndns, Bandwidth Control, Static Routing, Logs, MAC Clone, Backup and Restore Settings, Firmware Upgradeable via Browser, Wireless AP, 4 Port Switch, Factory Default Setting: IP Address 192.168.0.1, Network Adapter, Remote Web Management
SSID SupportSSID Broadcast: Enable / Disable
CertificationFCC, CE
(Source-flipkart)

 

[Hariharan Madhavan]

Yes it is compatible. Proceed

 

[deepak3030ei]

Thanks!!!

 

[karthikhh]

Hi,

I have an ACT fibernet connection and bought a Tenda N150 router but I am unable to setup the device and the message reads "check WAN port connection". I also got a technician from ACT to set it up but he was unable to do so. How can I find if the deivce is flawed or not or some guidance on the setup? I use a Mac OS.

 

[sathya2k8]

hi have a Cisco Access point, Does it suport the ACT fibernet ?