Issue with connecting to GPON ONT(1GE Secure ONT)(V2801SG) – NETLINK

[whyzee]

Try setting manual IP in Win10 to 192.168.1.2 and then try both gateway IP manual 192.168.1.1 and 192.168.1.254 ? Then see if you can at least login to the web UI of the Netlink device?

Also tried this. no juice.

Does the netlink device have a hard reset button/pinhole which you can press to factory reset the device? (but then you will lost the settings stored in the device) maybe best to get in touch with your LCO/vendor who provided you the connection. Maybe they have done some custom autoconfiguration from the OLT server side.

Yeah, I've called the BSNL guy as a last resort. He should help me reset the router and the configuration back in order. Thanks for all the help.

 

[whyzee]

For anyone still searching, what worked was

1. Reset GPON modem. Make sure you have you username and password ready. Resetting will remove the username and password.
2. Use 192.168.1.5 as ipv4 with default subnet mask 255.255.255.0. Keep everything else empty
3. You should be able to login 192.168.1.1 using Firefox. If not reset again and again. I had to reset my modem 3 times for it to work.

 

[alanjok7]

Also tried this. no juice.



Yeah, I've called the BSNL guy as a last resort. He should help me reset the router and the configuration back in order. Thanks for all the help.

hey does this modem support bsnl ftth cause i cant seem to configure this.The interface is way different from what i used to have (Netlink dual band modem) .
please help me to set up this modem
THANKS.

 

[rap1021]

Can you post screenshot of the interface of your current modem..???

 

[rap1021]

hey does this modem support bsnl ftth cause i cant seem to configure this.The interface is way different from what i used to have (Netlink dual band modem) .
please help me to set up this modem
THANKS.

Can you post screenshot of your v2801sg