Can't Forward Ports and change NAT type

[db2611]

Enable DHCP v6 and check again

Doesn't work for me. it work for you?

 

[RiCo]

@db2611 Nope

 

[xvamp]

Did you try enabling port forwarding on TP-Link?

Yes, I did. And I have UPnP enabled. Still the port is closed.

 

[db2611]

@shashankb @Utkarsh Mahajan @RiCo
I didn't expect this. BSNL and Alphion provided me firmware update (within 24 hours) through e-mail. BSNL customer support is now better I think than those old days. I will flash it soon and give you results.
AONT-1143__0.4.H.00.02.15

 

[sidhartharoul]

How you guys are checking a open port ? , what are the ports you want to open?

 

[db2611]

open port checker

 

[db2611]

@shashankb @Utkarsh Mahajan @RiCo
I didn't expect this. BSNL and Alphion provided me firmware update (within 24 hours) through e-mail. BSNL customer support is now better I think than those old days. I will flash it soon and give you results.
AONT-1143__0.4.H.00.02.15

Updated firmware. No changes observed -_-

 

[sidhartharoul]

open port checker

@db2611 to open a port only port forwarding in the router will not work. you need to have a server at our end with the respective port, which open port checker can ping and get the result.

for example if you want to open port 80 (default http port ) you need to run a http server with 80 port in our local machine and set the port forwarding rule in your router and firewall (if necessary ) . then only open port checker can listen your port.

as per my knowledge BSNL doesn't use CGNAT (at least in my location ) so port forward should work.

 

[db2611]

Thank you @sidhartharoul ....port checker showed open after creating server.

 

[EmperorDante]

@db2611 how did you change NAT type bro i also have to change so i can do port forwarding for COD Mobile