Accidentlly enabled System Logs in Netlink HG323

[5trange]

I accidentally enabled logging in Netlink HG323 Modem. Doesn't retain passwords, SSID or anything. Can someone help me to wipe the logs?

 

[varkey]

Need some review of new BSNL Bharat Fiber FTTH Broadband Plans 777 / 1277 | BSNL Bharat Fiber Broadband

Ok, so I having a hard time in getting this Netlink HG323RGW / HG323RW to work in bridge mode. There is an option to enable bridge mode, but once enabled, I am unable to authenticate over PPPoE. Below is how its in router mode Below is how I setup bridge mode In router mode ie the ONT...

broadband.forum

 

[5trange]

I'm not familiar with Telnet, Telnet returns an error

Connecting To 192.168.1.1...Could not open connection to the host, on port 23: Connect failed

 

[varkey]

Check if telnet is disabled in the UI.

 

[5trange]

It's not checked, But when I check them and apply the settings, It reverts back to the default settings.

 

[prabu32]

Try to update new firmware.

 

[5trange]

I updated using HG323RW_Upgrade_Normal_SafeProtect_1_1.0.32-200424.tar but I still can't enable Telnet in router settings. Also tried factory resetting. Doesn't work.

 

[prabu32]

Try to downgrade the stable onu firmware. In some case it helps to recover.

 

[5trange]

Which firmware do I need to flash? Plus I haven't got the firmware files. Can you link me to one which works with Telnet?

 

[5trange]

I flashed with HG323RW_UPGRADE_NETLINK_BSNL_1.0.24-200225.tar and it fixed the Telnet issue, and I deleted the logs. Now it's all good. Thanks for your help!