Aeromesh LX63 AX3000: WiFi 6, 2x2 MIMO, 160Mhz, OpenWRT out of box at 3.9k at Amazon

[tr1k0N4]

You can install openwrt and then install any additional packages you wish to, brdr.
Personally, I wouldn't depend on ImmortalWrt.

 

[sku_kum]

What is s the openwrt model name to be provided in the openwrt firmware selector for Aeromesh LX63 AX3000?

 

[tr1k0N4]

Brdr @SpeedxThunder has given the link, it's the same one.

 

[Sanemi]

Anyone suggest me a USB 2.0/3.0 to Ethernet adapter for Openwrt router

 

[sivark]

guys has anyone flashed openwrt?... if so how is the performance, does it still run HOT?

 

[greghouse]

@sivark yes, just the same sysupgrade package mentioned above, and yes it does run hot still

 

[sivark]

Thanks mate! upgraded rock solid, using 12v cooling fan to dissipate heat. I have planned to move from ACT to BSNL FTTH and would be using LX63 (openwrt) for WiFi (connected to ONU which will be in bride mode), could anyone kindly guide me on the steps required to be configured in openwrt.

 

[chirantan0]

Guys is the flash size 128MB? Also the website has pics showing a usb2.0 port, but I talked to them and they sent me pics of one without any usb. Someone please confirm I am about to place an order tomorrow, I don't care about the usb port too much but if it's not 128MB flash, it's a deal breaker

 

[chirantan0]

The RAM is 256MB and flash is 128MB for anyone wondering, stock firmware and bootloader is a fork of hanwckf's immortalwrt build

 

[chirantan0]

Small update - Recieved the router for ₹3540 shipped, the bootloader the device shipped with has issues with openwrt 24.10.2 so updated the bootloader to openwrt uboot following instructions from here and now it works perfectly fine with mainline openwrt, I also opened up the device to see if an usb port could be soldered on, unfortunately the device does not include the usb through holes, another issue is i could not get the leds working properly, everything else is fine, solid device for 3.5k