Are VoIP Services or SIP Settings available in Airtel Xstream Fiber Broadband?

A

Arunesh Dutta

Messages
21
Location
NA
ISP
BSNL
Hello all wanted to know is there any VOIP settings for AIRTEL xtreme fiber users if so how to access same using SIP settings ..thx
 
Sort by date Sort by votes

Attachments

  • microsip.webp
    microsip.webp
    20 KB · Views: 752
Upvote 0
I would like to test this. Is anyone aware of the SIP server for Delhi?? Following is what log from Nokia ONT. I can reach the VOIP default gateway from directly connected PC on the ONT but nothing beyond that.
The ims.airtel.in resolves to 125.17.6.24
what is the difference between SIP.ProxyServer and SIP.OutboundProxy?? Which value will go in the MicroSIP client.

Code: 
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.AuthPassword=Huawei@1)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANIPConnection.1.SubnetMask=255.255.240.0)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.ProxyServer=10.232.132.130)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.URI=phoneno@ims.airtel.in)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.ProxyServerPort=5060)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.DirectoryNumber=phoneno@ims.airtel.in)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANIPConnection.1.Enable=1)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.Enable=Enabled)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.OutboundProxyPort=5060)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANIPConnection.1.ExternalIPAddress=<staticip>)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.RegistrarServer=ims.airtel.in)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANIPConnection.1.DefaultGateway=<defaultgw>)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.OutboundProxy=10.232.130.170)
1970-01-01 05:33:15[al]TR069: SetParameterValues(InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.AuthUserName=phoneno@ims.airtel.in)
 
Upvote 0
Hi,
I recently got a Airtel Xtreme Fibre connection. I was wondering if I could use both the regular phone line (RJ11) and a SIP Phone at the same time.

Router Model: Nokia G-2425G-A

Would it be possible to call and receive from this number remotely ? Lets say from another house(not on Airtel)

I did try binding my port 4, but "Connection Name" wont let me choose anything and I wasn't able to proceed.

Thank you for reading through, any input would be great.

Have a good day!
 
Last edited:
Upvote 0
Can someone tell me how to enable NAT in WAN settings since it is disabled and doesn't allow changes. I tried configuring MicroSip but was not able to since NAT is not enabled.
 
Upvote 0
You must log in or register to reply here.
Back