Are VoIP Services or SIP Settings available in Airtel Xstream Fiber Broadband?

[Arunesh Dutta]

Hello all wanted to know is there any VOIP settings for AIRTEL xtreme fiber users if so how to access same using SIP settings ..thx

 

[ganges563]

hi guys,
i have this router, i am trying to enable the NAT and INTERNET on 2_VOIP_R_VID_660,
even after doing the inspect element and enabling the checkboxes, nothing happens when i click on save.
tried to trigger save via console getting "The normal user do not have permission to do this!"
i read somewhere on forum that this model/firmware are pretty locked down?
am i reading too much into it? any simpler way to enable NAT/INTERNET on 660 and get voip working?

 

[tr1k0N4]

Not possible at all for you, owing to the locked down firmware.

 

[Dagamerguy]

@tr1k0N4 @eshwarn yes, i have reset my router and i also have my static ip details for sip connection. I have setup a voip wan profile too on my router with 660 vlan. What do i do next to be able to use the voip service?

 

[tr1k0N4]

You need to enable Internet in the voice WAN profile alongwith NAT and then create a static route.

 

[Dagamerguy]

@tr1k0N4 is there a way i can reach out to you? I need some help please with the method you have mentioned.

 

[tr1k0N4]

My tg is same as my username here so hmu

 

[eshwarn]

I have been able to setup Yealink SIP T31P to work with Airtel VOIP but stuck with giving it a Time server, so whenever device loses power, date/time are lost. Anyone know if Airtel has an NTP server in their VOIP network?

 

[tr1k0N4]

Don't think so.

 

[tangojoker]

Hi, I have a unlocked Nokia G-2425G. I want to setup the VOIP on the router. where can i find the steps to do so? I have the config file downloaded before unlocking the router.

 

[tangojoker]

Hi, I have a unlocked Nokia G-2425G. I want to setup the VOIP on the router. where can i find the steps to do so? I have the config file downloaded before unlocking the router

I copied all the details from my config file manually, the 2_VOIP_R_VID_660 wan link is UP.

however the voice information,
Line Status - Error
Register Status - Unregistered
Register Error Code - Unknown
Register Error Reason - Register Time Out

Any help?