Broadband disconnection

[nimeshchandran]

i recently got the bsnl 500c plan. the problem is the i gets disconnected after abt 20 minutes and i have to switch off and switch on the modem again. can anyone please tell whether my line statistics are fine???

Status SHOWTIME Mode G.DMT Type Interleave Downstream Upstream Rate (Kbps) 2042 830 SNR Margin (dB) 23.9 18.0 Attenuation (dB) 26.0 13.5 Output Power (dBm) 19.6 11.9 Super Frames 62104 62102 Super Frame Errors 2 0

 

[essbebe]

Ok. Attenuation is higher. Your D/L speed is normal ? ?
1.Mention modem model.
2.Connect all phones AFTER ADSL splitter supplied by BSNL.
3.If not possible use additional ADSl splitters for PHONE/s ONLY.
4 Check in modem's WAN page Idle time : set it to 0)

REF:BSNL BROADBAND MAIN MENU

 

[nimeshchandran]

yeah download speed is somewhat normal.. for torrents i get about 80kB/s and direct downloads are also fast...my modem is the old one that is DareGlobal DB108i have connected al phones after my splitter... actually i am connecting the incoming line to my home directly to the ADSL splitter...and i cannot see an idle time in WAN page...:ashamed:

 

[superprash2003]

are you connected via usb or lan?

 

[essbebe]

For reference :

Shanghai DareGlobal Technologies Co., Ltd

New Page 1

 

[nimeshchandran]

i am connected via LAN...

 

---

[essbebe]

members/nimeshchandran/
Modem : DareGlobal DB108
Problem:frequent disconnection every 20 minutes.
and i cannot see an idle time in WAN page
See the link from GOA BSNL. ( Post No 5 ) If the WAN page,
where you have entered your ID and password is different Post screenshot.
Your modem appears similar to Beetel 220BX .
Change Mod to GDMT if in ADSL2+

 

[mshiva]

For the last two days I haen't been able to connect to the internet. Only today, I've been able to connect to internet.

 

[nimeshchandran]

hey i configured my modem to work in bridged mode now.. i think it solved the problem... i am not sure will have to put it to test full tonight... well putting it in bridged mode started another problem... i used windows dialer to dial in and it shows the 2 connected computers... but along with it another same icon is there in taskbar telling there is limited or no connectivity by the lan card... i think its not able to acquire the ip address... internet is working fine eventhough...

 

[essbebe]

Please post Device status page and WAN page. for my database. With " limited or no connectivity" how you get connected ?Post ipconfig/all . Start run type cmd type ipconfig/allor Start Network/LAN/status/ support details.