BSNL Broadband: ITI DNA-A211-1 modem reboot using tst10

[damole]

I'm trying to reboot my modem using TST10.

here is the normal windows telnet session

http://img187.imageshack.us/img187/4531/telnetreboot.jpg

here is the script I am using:

192.168.1.1
WAIT "Login:"
SEND "admin\m"
WAIT "Password:"
SEND "admin\m"
WAIT
SEND "reboot\m"
WAIT
SEND "logout\m"

the modem uses a ">" as a prompt but when I use WAIT ">" it hangs so I changed it to just WAIT and now it stops at sending reboot.

https://broadband.forum/%5BURL=http://img22.imageshack.us/my.php?image=rebootmodem.jpg%5D%5BIMG%5Dhttp://img22.imageshack.us/img22/9540/rebootmodem.jpg%5B/IMG%5D%5B/URL%5D%20%5BURL=http://g.imageshack.us/img22/rebootmodem.jpg/1/%5D%5BIMG%5Dhttp://img22.imageshack.us/img22/rebootmodem.jpg/1/w580.png%5B/IMG%5D%5B/URL%5Dhttp://img22.imageshack.us/img22/9540/rebootmodem.jpg

At this point if I press enter in the window then the command executes.

 

[ddk]

i searched in the forum i could find some post regarding WA3002-g4 but i couldn't find for WA3002-g1 for restarting modem using TST10

 

[superprash2003]

you could try using the same script.. may work..

 

[ddk]

i tried this script but it didn't worked for me192.168.1.1 23WAIT"Login:"SEND"admin\m"WAIT"Password: "SEND"admin\m"WAIT"\m"SEND"console enable\m"WAIT"\m"SEND"restart\m"WAIT"\m"

 

[essbebe]

https://broadband.forum/mtnl-broadband/23795-router-reboot-forgive-me-if-posted/#post164595
try the script posted here.

Source : SEARCH BOX above
key word: tst10

 

[captaincalimatous]

this modem has problem ,bsnl is replacing all iti wifi modems with new once ! . . .its has firmware problem ! . .this fis rom Bangalore ! .. . ..

 

---

[essbebe]

Discussion is about TST10 script
all iti wifi modems with new once (* ones)
What is the new model make/details ?
two:
There is a software upgrade suggested in SEM India site.
Either try it yourself, or get it done at Bsnl broadband section.

Welcome to SEMINDIA, Semiconductors - Made in India

Para three:
WA3002_g4 has also the same Hardware Board.
( same HW board for Beetel 450BX)

REF:https://broadband.forum/bsnl-broadband/50052-utstar-wa3002-g4-vade-mecum-quick-reference/#post331246

 

[captaincalimatous]

Discussion is about TST10 script

What is the new model make/details ?
two:
There is a software upgrade suggested in SEM India site.
Either try it yourself, or get it done at Bsnl broadband section.

Welcome to SEMINDIA, Semiconductors - Made in India

Para three:
WA3002_g4 has also the same Hardware Board.
( same HW board for Beetel 450BX)

REF:https://broadband.forum/bsnl-broadband/50052-utstar-wa3002-g4-vade-mecum-quick-reference/#post331246

the model which is mentioned above from iti .and all will be replaced with new once ! . . .mostly utstarcom will be the replacement ! . . .the problem is it resets every after every 24 hours to default settings and had to be re configured! . . .

 

[bhargavi.ganeshuni]

i have bsnl bradband modem(dna-a211-1) with wifi.i have Nokia 5800 expree music with wifi avilabulity.in my mobile setting it ased ipv4,ipv6,proxy server name,proxy port.plz tell me how can i connect net through bsnl modem wifi

 

[essbebe]

i have bsnl bradband modem(dna-a211-1) with wifi.i have Nokia 5800 expree music with wifi avilabulity.in my mobile setting it ased ipv4,ipv6,proxy server name,proxy port.plz tell me how can i connect net through bsnl modem wifi
1.
Please see the "sticky" post for Wa3002-g4. quick reference.
modem settings are similar.
.2.
Use "Always On " PPPoE mode . Not Dialer 'Bridged" mode.
Enable DHCP in router.
computer.
Disable IPV6 in network settings.
Select obtain Ip address automatically.

Para two :
3.
if problem still

post copy/paste ( no edit ) this data.
Start RUN type cmd Ok
New window
typeipconfig /all
4.
The wireless network name you had used in modem/router
should show in Available Wireless networks" in laptop and Phone .