Bsnl fiber connection with mesh router

[anandf12000]

Hello guys,
I have bsnl fiber provided me net link GPON non wireless device and recently purchased TP-Link M4 mesh pack of 3. As of right now how I connected is take lan cable net link to wifi mesh connected via dynamic ip courage is nice some times internet not stable. It's getting disconnected for 5 seconds after reconnect. Some times youtube stream get affected like this.
I have contact bsnl user name and password
It will block mac if u change the modem or router internet will not work.
What is best solution

 

[alap4m]

Try switching off all wireless communication from Netlink ONT.
Turn Off IPV6
Ensure the ONT is kept in a well-ventilated and dust-free environment.
If this doesn't help, then log into your ONT and check what are the Tx and Rx Power. The Tx Power should generally be between -12 to -28dBm.
If the Rx Power is beyond -28dBm then raise a complaint about "Internet is not stable" to your LCO.
If the Rx Power keeps fluctuating significantly, then too, make the same complaint.

It seems BSNL is not allowing non-TEC MAC IDs. Hence, Bridge Mode may or may not work.

To ensure the Mesh Network is NOT the problem, switch to a cheap 300mbps Router and check if the problem persists. Additionally, try to connect a LAN cable DIRECTLY from ONT to a Laptop/PC to check if the connection is stable.

 

[!!..PD..!!]

You can do the bridge mode on ONT and spoof the mac from ONT if your POWER is not the issue.

 

[anandf12000]

thank u

Tx Power

2.740196 dBm

 

[anandf12000]

Hello,
PD
power is not issue.
can please explain me step by step process.
please i have little experience only.

 

[!!..PD..!!]

Rx Power ?

 

---