BSNL Type 2 modem - Wifi - works via LAN, not wifi - inet led off

[Bharath Pasupuleti]

Hello,I had a BSNL Type 1 Modem and now got it exchanged for a BSNL Type 2 Modem. I am on 700 UL data plan. Able to connect to internet via PC connected to modem via LAN.Not able to connect to internet (open websites) via Laptop although it is detecting wireless network and shows connected.Led Status ower GreenDSL GreenInternet OffLAN Green (blinking)WLAN GreenShould iNet Led be on? And what can I do to get it done? Thanks in advance for any help.

 

[Deleted member 10390]

Which mode are you using ? I think you are in Bridge mode and hence the Internet LED is OFF. Do the following

1. Configure your modem in PPPoE mode.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of connection (in both machines), set " Obtain IP address automatically ".

Also mention your modem - model and make.

---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------

Try this for configuring wifi

Chennai Telephones- Changing password in DataOne Pre-configured modem

 

[Bharath Pasupuleti]

Hello Dilip,I followed your advice.Reconfigured modem to PPPoE. it was on bridged earlier.Enabled DHCPTCP/IP is already set to obtain ip address automaticallyNow inet LED is on but shows REDMy Modem make is teracom and model is T2-B-Gawv1.4U10Y-BI

 

[Deleted member 10390]

Are you able to connect now ? Are you using any encryption like WEP WPA2 ? If yes, disable it and check. Are you sure you did the PPPoE correctly ? Check this tutorial and confirm

Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION

 

[saif123456789]

hey i forgot my user name and passwordwat do i do