BSNL WiFi Activation for Wave-II

[[email protected]]

Hi All,

I have a active BSNL Broadband connection.I need your help for activating the Wi-Fi connection.

I have Pro-net Wireless router Model: PN-54WADSL2. OS: Windows

I recently purchased Samsung Wave-II and I am trying to connect it to net using Wi-Fi.
However I am contineously getting "DNS Failed" error message. I tried everything but didnt get the success.

Mobile connects to Wi-Fi with BSNL router without any issues.
I think I am missing some configurations in Pro-net router configurations.

http://www.facebook.com/photo.php?fbid=197142760330109&set=a.197142730330112.57612.100001031604606&type=1http://www.facebook.com/photo.php?fbid=197142760330109&set=a.197142730330112.57612.100001031604606&type=1
https://broadband.forum/%5CSettings1anybody please help me out? Appreciate your help.

-Abhijeet

 

[essbebe]

Hi All,

I have a active BSNL Broadband connection.I need your help for activating the Wi-Fi connection.

I have Pro-net Wireless router Model: PN-54WADSL2. OS: Windows

I recently purchased Samsung Wave-II and I am trying to connect it to net using Wi-Fi.
However I am contineously getting "DNS Failed" error message. I tried everything but didnt get the success.

Mobile connects to Wi-Fi with BSNL router without any issues.

I think I am missing some configurations in Pro-net router configurations.

http://www.facebook.com/photo.php?fbid=197142760330109&set=a.197142730330112.57612.100001031604606&type=1http://www.facebook.com/photo.php?fbid=197142760330109&set=a.197142730330112.57612.100001031604606&type=1
https://broadband.forum/%5CSettings1anybody please help me out? Appreciate your help.

-Abhijeet
Pro-net Wireless router Model: PN-54WADSL2

Upload pictures at tinypic.com or imageshack and give link/s here..


(1)
Pronet model seems to be same as
Linksys WAG-54G Wireless ADSL or WA3002-G1 or
Beetel 450TCI models.

Connect in "Always On" PPPoE mode
( USERID/PW entered/stored in WAN page )
Enable DHCP. ( also UpnP box if seen )
Disable white list MAC address.
Disable MAC filter.
Try without security code. Then wep wpa etc.
post screen shot of wifi settings page.


2.
Mention BSNL wifi model/make/number.
( may be listed in wa3002-g4 quick reference guide "Sticky" thread here )
3.
In laptop if OS is Windows 7 install "Connectify" and laptop
will work as an AP within range.
( a lan ethernet cable connection with wlan card will do )

FEEDBACK.

 

[[email protected]]

Hi,

Thanks for the quick reply.

I have the same setting as you mentioned. I am using Pro-net ADSL+ Router. I have not purchased BSNL router.

Screenshots are shared as below:

May 1, 2011 | Facebook

-Abhijeet