Configuring D-Link GLB-502T ADSL 2+ Router

[sam999]

Here's a small guide created by me :cool2:



and how about gatetway, IP Settings and other details do i have to enter.

 

[Kalps06]

Yup me too noticed GLB502T is faster in Bridge mode than PPPoE, so I have been using my Modem in Bridge mode.If U have DHCP server Enabled than u won;t need to enter IP address manually, pc will pick the Ip automatically.

 

[desicooldude]

Yup me too noticed GLB502T is faster in Bridge mode than PPPoE, so I have been using my Modem in Bridge mode.

If U have DHCP server Enabled than u won;t need to enter IP address manually, pc will pick the Ip automatically.


GREAT and i thought i made a big mistake by buying this.:thumb:

 

[sensen27]

Please tell me how to configure D-Link GLB-502T ADSL 2+ Router for DATAONE Broadband?

Step by step clarification will be a great help.


Follow the below steps:
>Configure you D-Link GLB-502T , use PPPOE type in you adsl2 router.
>Once you got connected your internet then(Make sure Pppoe light in D-Link router is glowing)
>connect the internet ethernet cable from dlink router to vonage device internet port.
>connect one ethernet cable from vonage device ethernet port-I to your pc or laptop.
>open IE browser and type http://192.168.15.1
>login thru, username: "router" and password: "router"
>now you can able to browse the vonage device congfiguration page
>Click "SETUP" from top menu
>click "WAN Configuration"
> now configure as below
>Type: DHCP
> Leave rest as default
>Click save button in the bottom
>And then click connect button on the same page
>Now you can able to see the ip address in "DHCP Settings"
>Now go to Status on top menu, you can able to see it has been connected.
>Enjoy talking now