Custom Embedded Linux hardware?

  • Thread starter Thread starter amish
  • Start date Start date
  • Replies Replies 13
  • Views Views 1,752
Wow! I re-read your post and tried to google for everything I did not understand!

Now I feel like I should learn electronics!! :D (as a hobby)

Can you (or anyone) suggest me if I want to learn about the stuff @volcano619 said, is there any specific course?

About my relative. He did not say much what he is planning to do.

Roughly he wants to create custom linux box/device and sell them as plug-and-play desktops. (something similar to rasperry pi but useful in offices)
 
In this case...i would suggest him getting a processor like Samsung Exynos(in the site arm9.net)..available locally also in electronic shops if searched

Or get a ASIC (Application specific controller) like Qualcomm(a little expensive though) and get the things needed from their website itself...

For your specific needs..i would suggest you to go through this link
in.element14.com/microprocessors-mpu

OR

in.element14.com/microcontrollers-mcu
 
custom embedded hardware as in use any existing projects and then build on that?
like raspberry pi, beagle bone, et al? or is it a complete DIY.
like get all the IC (integrated circuits) and then design the pcb and then fabricate a pcb and then SMD the components on the pcb and then trial and error?
or the third possibility, vlsi hacking. where you are the judge, jury and god of the circuits and components and you control everything with a wicked evil smile and wink with a muhahahahaha? something like that?
if its the first one? then pretty easy, try those countless numerous developer boards with cpu from broadcom, or texas instruments or sitara or qualcomm or blah blah and try and test it out and do accordingly.
./configure --custom-flags && make && make install ;-)
if its IC, then its a for sure more than 2 year project. I am still stuck with one project which i am building, and i am only done 2%, i am building a jtag arm/mips/x86 with signal processing (DSP) i.e. sniffing the electrical signals and also read the encryption keys stored inside the processors.
and if its vlsi hacking, sorry brah/bruv, i know only .00001% on this. so i will not be able to help you with anything except may be asking you to RTFM any and every VLSI hacking stuffs.
happy hacking!
-paul
 
Back