Detecting ADSL Status in Sterlite SAM300AX modem

[logiccool]

Can some one tell me about the state of this modem when
1. ADSL is stable
2. Which LED will show the non avaliablity of ADSL

in short the significance of Link and ACt led's in pic shown above
Thanks in advance.

 

[flame]

I think Link LED for ADSL

 

[Nemesis87]

For ADSL stable1)Link LED should always be solid 2)ACT LED should be blank or [flickering (if using the network)]3)LAN1 or LAN4 port should be solid/flickering.Non availability is shown mostly by blinking of Link(line) LED . (if line/phone line is busy or some line problem like attenuation)see the modem manual in CD or hard copy of it for more info.

 

[logiccool]

For ADSL stable
1)Link LED should always be solid
2)ACT LED should be blank or [flickering (if using the network)]
3)LAN1 or LAN4 port should be solid/flickering.

Non availability is shown mostly by blinking of Link(line) LED . (if line/phone line is busy or some line problem like attenuation)

see the modem manual in CD or hard copy of it for more info.

thanks

 

[Nemesis87]

thanks

Ur WElcome

more info on their site:

http://mtnlmumbai.in/triband/htm/newuserguide.pdf chk in their troubleshooting section

& here is simple if u don't want to download above pdf Know your Broadband / ADSL Service