Getting AONT-1143 on Bridge mode

[shashankb]

How do I use BSNL Alphion ONT-1143 with a second router in Bridge mode . Please share the screenshots .
I suppose the PON WAN Bridge mode has to be used
If at all I want to use it with a OpenWRT , how will I configure VLAN ID , etc

 

[Elavarasan]

Netlink Bridge Mode without port / mac reset | BSNL Bharat Fiber Broadband

Bridge mode is very important for me. So, tried to get my hand dirty in order to configure it without the help of BSNL / LCO, as all are busy deploying new FTTH connection (even though, it is a village, but most likely due to complete failure of ADSL upon drizzling / rain). I was provided with...

broadband.forum

 

[RiCo]

Were you able to figure this out? @shashankb

 

[TurboUser]

@shashankb Did you get this ont on rent or did you purchase?
If bought, at what price?

 

[shashankb]

I bought it on a Rental
It is better to purchase it if you stay more than 2 Years in one location . I will return it soon and buy a Huawei or Nokia ONT for universal uses

 

[shashankb]

Were you able to figure this out? @shashankb

In Dashboard
WAN ----->>PON WAN------>>>You will see an option called Channel Mode
---->>>Change it to "Bridged"

 

---

[RiCo]

Yeah. I know about that. Were you able to get it to work. I have tried to set in bridge and failed. Tried to clone ont mac on router. No luck

 

[shashankb]

My packets always dropped when I set it on Bridged . It did work with a Digisol , but did not with my Netgear . Which is your router ?

Surprisingly the Wifi on this ONT is able to deliver a straight 110 Mbps on my 100 Mbps plan if there are less than 5 devices on the Wifi.

 

[RiCo]

I'm planning to buy C6 as I have moved to 100 mbps plan. Before I purchase, I wanted to test if bridge mode works fine. So I tested with an old Tenda router.

 

[shashankb]

I would say if the ONT is on Rental . Surrender the ONT and get your own (Huawei , Nokia , TP-Link,) as future will be usually Fiber only

Does your Tenda have a Vlan id and other settings needed for this ?