Help me with this Linux based project

  • Thread starter Thread starter tesla.coil
  • Start date Start date
  • Replies Replies 8
  • Views Views 1,455

tesla.coil

Newbie
Messages
26
Location
NA
ISP
BSNL dataone
Hello all,Id want you guys to help me in this small project of mine,i dont exactly know if its possible or not,if yes please assist me with it.Well the thing is i have a spare P3 ,1GB computer and i wish to convert it into a linux based adsl router-modem cum firewall,so as to serve as a replacement\substitute to the UTstarcom300R2U modem that am currently using now,i know its a bizarre idea but id want to try it out.Firstly,the problem here is with the hardware,how many sets of NIC card do i need? If you see the UTstarcom has 1 RJ11(wan) and 1 RJ45(lan) ports.Can i insert an internel ADSL modem in my computer to replicate the RJ11 port of UTstarcom,along with a normal NIC card for the LAN???Secondly,as far as the question of OS is concerned i intend to install Smoothwall or IPcop or anyother normal linux distros along with a set of iptable rules,which should do fine i guess.Anyways,is it possible to convert a computer into something like that,that works as a adsl modem + router + firewall?? I'd like to have your advice\suggestion\tips to the above mentioned project,id be glad if you could assist me with it,just remember my sole aim is to replace the BSNL provided USTarcom with a normal computer.
 
u need modem to convert ADSL signal to LAN signal. so u cant do away without utstar modem.abt firewall, u can setup Bridged mode and configure. u need 2 LAN cards, 1 line for LAN and 1 line coming from modem.u can also do with 1LAN in which case ur modem also acts as a switch. but then other comp in ur LAN can also access modem.
 
u need modem to convert ADSL signal to LAN signal. so u cant do away without utstar modem.

Well cant i get some kind of internel ADSL modem that i can plug into my PCI slot of the computer??
 
yes u can. but i havent heard them being popular and i dont know if linux driver wud be available.
 
hmmm well yeah you are right regarding the linux drivers thing :( IS there any other alternative to that??
 
It looks possible to convert a PC to a router with the help of Linux..but in your case you surely need an ADSL internal modem..I think the cost of that internal modem will be somewhere near to your UTstarcom router..So the conclusion is - "there is no gain"..... hence drop the idea of this project...:p
 
Thanks for those links prakash,but most of the links you gave me deal with the software part,esp the configuration,but whats first to be done is to configure an adsl modem esp and internal one,i need to find a PCI based internal adsl2+ modem which must come with linux drivers.
 
Back