Help needed: Configuring IPv6 on pfSense with local ISP (D-WAN) /64

[Chip]

@WieldyBinkie you can track only one WAN connection for IPv6 not both WANs. I too used to get v6 on both Airtel and TPF but I since I went with a static IPv4 on Airtel I selected track TPBB and all works well/

 

[WieldyBinkie]

Reference for future: Configuring Multi-WAN for IPv6

 

[Chip]

@WieldyBinkie you require static v6 addresses on 2 or more WANs which you do not get with Airtel but only with TPF. Also, BSNL hasn't given out v6 yet in my city. Not that it matters though.

 

[WieldyBinkie]

Going off topic here; @Chip If you are of pfsense CE, can you check and let me know how 2.7.0 is? It just got released.

 

[Chip]

@WieldyBinkie I applied for and received a pfS + license for home use and that's what I am using now. You can do that too.

Check this out: pfSense Plus Subscriptions

Also, one clarification - TPF reserves only the 1st 64 bits of your address as a 'static' IP, the remaining 64 are automatically assigned on your device via SLAAC or RA as the case may be.

 

[WieldyBinkie]

I’ve been on pfsense+ since 22.05.