Help needed in Configuring Wireless Internet - Dlink Wireless Router + ZTE Modem

[educated_fool]

Help needed in Configuring Wireless Internet

I want to Configure my DIR-300 Wireless G Router


With ZTE BSNL ADSL MODEM

http://img136.imageshack.us/f/dir300.jpg

How will I configure wireless home network using ZTE ADSL Modem and D-Link Wireless Router?

Note:
*zte bsnl modem ip 192.168.1.1 (Bridged / Dialup Mode)
*PC Ip > 192.168.1.2
*Default gateway > 192.168.1.1
DNS Server Address > Blank


how will i find out the ip address of wireless router ? ( i cannot get into configuration mode)

Any help would be appreciated.



Thanks

 

[essbebe]

Default IP address 192.168.0.1
May also be 192.168.1.1
Default admin username admin
Default admin password -none (blank)-
Support

Official model website D-Link - Home & Home Office...
User Guide/Manual ftp://files.dlink.com.au/products/DIR-300/Man...

Firmware updates ftp://ftp.dlink.co.uk/dir_products/dir-300/DI...
Firmware without Tomizone Wi_Fi Hotspot software & all it bloating and bandwidth use.

Model specific FAQ/Support page D-Link Support Resources...
Manufacturer Datasheet ftp://files.dlink.com.au/products/DIR-300/Dat...


Change to "Always On" PPP/PPPoE mode. In wan page of modem Uncheck "Bridged'
and enter userId and PW in modem etc.

 

[educated_fool]

still cannot get in to D-Link DIR 300 router's configuration mode : (anyways... Thank You essbebe

 

[essbebe]

still cannot get in to D-Link DIR 300 router's configuration mode : (

anyways... Thank You essbebe
1.
START RUn type cmd
Ok
New Page.
type ipconfig /all

copy/paste data here.