-
Amazon Deals - ToS - Like us?
How to configure Nokia G140W-C in bridge mode?
- Thread starter abhinavkndka
- Start date
- Replies 59
- Views 68,387
-
- Tags
- nokia g-140w-c
Hi just wanted to check if you receive ipv6 in pre and post bridge modeSo, I finally found the solution to this.
Apparently, only Lan port 4 of the router Nokia G-140W-C can do bridging mode. All the other ports can't.
I have done the change and it's working for me now. Finally, I can use my Asus router for everything, and Nokia router just for termination.
Please try, I am sure it should work for everyone.
The changes you need to do on the Nokia router are just 2:
1. Change the Lan port 4 to bridge mode (it will need a restart)
2. Enable IPoe mode in WAN settings. (Just restart after this to be on the safe side, though it doesn't need a restart)
Happy bridging and please don't forget to upvote if it works for you
Upvote
0
I have the same problem, my Airtel VDSL connection is changed to FTTH and I want to use my own Asus DSL-68u Router.(for routing)
I have bride the LAN port 4 and enabled the IPOE on Nokia G-140W-c
Can someone share the screenshots how the connections are done in the ASUS router !!
It will be really great help..
Thanks
I have bride the LAN port 4 and enabled the IPOE on Nokia G-140W-c
Can someone share the screenshots how the connections are done in the ASUS router !!
It will be really great help..
Thanks
Upvote
0
I had the same issues with my archer c80. Couldn't get it to work despite following everything said here. Their teams were of no help at the begining. Apparently even the nokia router supports bridging. It's not about the router actually. They keep the feature disabled from the backend. And the usual management guys you talk to won't have any idea what it is or how it works.
Yesterday i tagged airtel on Twitter and made a public rant about it and how i was fed up enough to leave their service. The issue was escalated immediately and this morning i got a call and my request was forwarded to the backend team. They resolved it within an hour. They enabled the bridge mode from their end(and yeah only on port 4) at which point my internet stopped working. I was told to connect my router and feed the ppoe details. Everything has been working great since then. Disabled wireless on their router and bridge is working fine with the nokia g140w-f router here. Contact your local backend teams guys or like me take to Twitter if nothing works..
Upvote
0
@tellanand Look at @shavendum post above. Maybe they are untagging the port from backend.
Upvote
0
@rajil.s - you are right. I figured that out recently as well. They have a config file that they push from the headend upon every ONT boot that determines how the ONT is configured to come up - bridge support, VLAN tags on bridge, SIP password etc.
They can infact control to a level where, they can make data bridged in tagged mode and voice in untagged mode or any such combination!
Upvote
0
They control every aspect of the router and i feel no changes will work unless provisioned from their end. You change a small thing and the internet stops working. Reset it from the router or the web GUI and they restore everything even the ssid password. Heck you can even change the ssid password and guest mode etc using their xstream broadband app. This suggests they push the configs from their end. Nothing is in user control unless they want to. It's good from the perspective of a normal user who may play around and mess up stuff. But for power users that's not good.
Upvote
0
