How to use Airtel Xstream Broadband (DASAN H660GM-A) for VOIP/SIP/Softphone in Android/PC?

[Cronus-II]

Login to router

Go to Firewall->NAT Forwarding->ALG Switch-> Turn on SIP, H323, PPTP, L2TP, PPSEC and click on save.

Create a Static Route/Route in your router settings (MUST)
Destination Gateway - 10.0.0.0
Subnet Mask - 255.0.0.0 or 255.0.0.0(/8)
Default Gateway - You will find in WAN connections (Check for VOICE tick marked one tab {DASAN H660GM-A it's WAN1 by Default})
Metric - 1
Interface- Select your VOICE configuration enabled from list. (for DASAN H660GM-A it's WAN1 by Default)
Status - Active/Up/Activated click on save.

Go to Maintenance->Logs->System logs (Search here for SIP- and find you landline number, Here you will see proxy details, port & password take note)

PC Setup - Install MicroSIP-

Account Name - +91Your_Landline_NumberWith@ue.ims.airtel.in (ex- [email protected])
SIP Server - 100.xxx.xx.xxx (Advanced Setup->WAN Connections->WAN1 IPV4 address or You will get this from system logs when you search for SIP- look for SIP/2.0/UDP 100.xxx.xx.xxx:5060;received)
SIP Proxy - 10.x.x.x (VoIP -> SIP Proxy address Or You will get this from system logs when you search for SIP- look for Sending 2 bytes keep-alive packet for acc 0 to 10.x.x.xx:5060 Or UDP 10.x.x.xx:5060)
Username - +91Your_Landline_NumberWith@ue.ims.airtel.in (ex- [email protected])
Domain - SIP Server:5060 (Ex- 100.xxx.xx.xxx:5060)
Login - +91Your_Landline_NumberWith@ue.ims.airtel.in (ex- [email protected])
Password - Nokia@1 (This pass will only work for DASAN H660GM-A)
Transport - UDP+TCP
Tick Allow IP Rewrite
leave rest as default do not change.
Hit Save - You are good to go. Enjoy

 

[Cronus-II]

• Stay tuned for Android/PC setup for ZoiPer ;-)

 

[Cronus-II]

Download & Open ZoiPer for Android/PC
On Login page-
Username - +91Your_Landline_NumberWith (ex- +911234567890)
Password - Nokia@1 (This pass will only work for DASAN H660GM-A)
-Now, Click on Login(For PC) or Create an account(For Android)
Hostname or Provider - ue.ims.airtel.in:5060 (This is for UP East & 5060 will be same for all, For your Check the last portion of Username in router's VoIP settings section)
-Now, Click on Next If any PopUp come just click on use anyway
Check the box of optional
Authentication Username - +91Your_Landline_NumberWith@ue.ims.airtel.in (ex- [email protected])
Outbound Proxy - 10.x.x.x (VoIP -> SIP Proxy address Or You will get this from system logs when you search for SIP- look for Sending 2 bytes keep-alive packet for acc 0 to 10.x.x.xx:5060 Or UDP 10.x.x.xx:5060)
-Now, Click on Next
Select SIP UDP
-Now, Click on Finish

You will be connected

- You are good to go. Enjoy

 

[shubhambgp]

Will this work if there is no landline facility available in my city? What do you think?

 

[tinkertyler]

@Cronus-II I'm from TN, and it says tn.ims.airtel.com for me, will I have to use the same?

 

[tinkertyler]

I used tn.ims.airtel.in and
it says request timed out on microsip.

 

---

[tinkertyler]

I tried ue.ims.airtel.in as well, and it says request timed out.

 

[abcx user]

i got the same problem. mine was also ims.airtel.in. when i try to connect its always request timed out.
when i check logs it says it refused request? im in west bengal.

 

[dogeshji]

not working , i cant ping SIP

 

[rizexor]

same request timeout