Issue with LAN ports on the router

[anubhav11]

Are port binding enabled?

 

[shashankb]

If you are referring to the MAC port binding , then its disabled

 

[PranjalT]

You said you've preconfigured those IPs in LAN and WLAN? Is it like you have reserved those IPs in your ONT or config them directly on your PC as static? Try removing those and enable DHCP in your ONT and keep the DHCP server as your ISP.

 

[shashankb]

Preconfiguring refers to the IP change from

Early config
192.168.1.30 - 192.168.1.256

Current config
192.168.1.30 - 192.168.100
and I have put DHCP lease time to infinity

I dont think this should affect any of my Internet
as i had the same config a month back


I have not set DHCP server as my ISP . Will do that and report by evening

In the port based filter nothing has been selected

 

[PranjalT]

He is referring to the Port Binding in WAN setting. You have to select all the ports(LAN1, LAN2, WLAN SSID1) in your WAN/Internet settings

 

[anubhav11]

If you are referring to the MAC port binding , then its disabled

No not the MAC Binding, but ports binding feature under internet tab where pppoe details are fed. If those are disabled for lan port 1&2 enable it

 

[shashankb]

Those are all up . here is the screenshot

 

[anubhav11]

I guess note down all the sip and pppoe details and try resetting the router..

 

[shashankb]

@anubhav11 I guess that is the only solution left . Will the company replace the router(if Hardware issue) as I pay a router rental and havent bought the router ?

 

[anubhav11]

Bsnl or lco will replace your router if it doesn't work properly after a reset (this is their last resort before a replacement)