Lasko Electrostatic Air Purifiers

Sushubh

Admin
Staff member
Messages
434,702
Location
Gurgaon
ISP
Excitel
Airtel
Update: No support from the company. Stopped using it after a year. Stick to HEPA based air purifiers.



I am going to gamble this time around with this model.

I need one more for the house. It went pretty bad for a few hours yesterday and it is the middle of October!

This year could be brutal despite the ban on crackers and whatever restrictions are still in place due to covid.

Lasko has two models with different capacities. I just need it for a smallish room so ordering the smaller model.

Lasko Electrostatic Air Purifier - A504IN

Lasko Electrostatic Air Purifier - A554IN

R3r3k4l.webp
gtkMVnu.webp
fKsRNah.webp
UtrRZZQ.webp
XyqTisj.webp
0WO19nF.webp
ET9ZdtY.webp
hIRPpLi.webp
qvLkOYC.webp
 
Last edited:
I think this does not come with any PM level monitoring. Have you used this product before?
 
I haven't. I have read some experiences over Twitter and they seemed fine. This one also probably lacks an auto mode because there is no sensor. So fan speed would have to be managed manually. Just like a table fan I suppose. I do need it in a room where I can actually just keep it running on low mode throughout the day 24x7 so it should be fine. I have enough air purifiers in other rooms to find out when the air is actually bad on particular days to run it on high mode.

My main reason to go for this instead of another Mi or other company was washable filters. Considered Realme, but they are not yet selling filters so no idea how much they would cost. Mi made sense because I already have 3 other units and all of them use the same filter so that helps. But I wanted to avoid the NFC model that records filter usage. Wanted to avoid the non-NFC Mi model because the performance is not very good because of shitty sensor.
 
Last edited:
Got the unit just now. Definitely more complicated than regular purifiers.

It has a very thin ionizer metal wire that can break easily. The box did come with two spare wires to replace it.

The ozone filter needs to be installed manually.

Watching their YouTube videos was helpful.

It seems to use large sized CPU fans for airflow that can get pretty noisy at high speeds. Remains to be seen if they become noisy at low speed as well once the dust starts settling in. Does not look like they are easily replaceable.

As the reviews indicated. It is pretty low noise at speeds 3 and under. It's audible above 3. So one can keep it running at low speeds throughout the day.

Would bring the Mi purifier in this room and see how fast it is able to lower the pm levels. Mi keeps an eye on PM levels even when it is not running. I think dedicated units to monitor PM levels are quite pricey.
 
Last edited:
Filter is washable means no need of changing filters every now and then ?
 
Yeah. IIRC they say filters can easily run for 10 years without needing a complete replacement. You can also wash the filters in dishwasher. Though I plan to just wash them manually. The only part that might need replacement is the thin metal wire that is part of the ionizer. Box came with two extra wires. Apart from that, it should require no replacement parts.


Source

Source


Source
Drying the filter completely before you put it back in the purifier is probably going to be the most boring part of owning this unit.

I have been keeping an eye on this company products for 2-3 years now. The regular price for the smaller unit is 12K. I got it for just around 8K so made sense to order it now.
 
Last edited:
I don't think it filters PM 2.5 . Seems like its good for dust and allergen particles only
 
Without a sensor hard to tell. But it does seem to work fine with respect to breathable air. I would suggest sqair though for hepa.

Ionizer based purifiers are generally not liked internationally. Though lasko claims it deionize air through filter or something.

It's just a weird product to recommend without getting a sensor first. Also it has the humming sound at low speeds so kind of annoying to keep it running while sleeping if you are annoyed by that. I don't use it in the room where I sleep. Mi in that room.
 
Mi one does have inbuilt sensor right ?
Why not measure the aqi level side by side with MI one.
I mean you can do it without purchasing separate sensor.
 
Back